Optical Tunable Filters
Manual Grating Fiber Optic Tunable Filter – 0.08nm Bandwidth, 20nm Tuning
Our Manual Grating-Based Fiber Optic Tunable Filter provides a simple way to adjust the center wavelength of a narrow band over a wide band. Wavelength tuning is achieved by rotating a grating using a micrometer. Based on proprietary optics, we offer extremely low insertion loss, high stability, polarization-independent operation, and high off-band suppression. It is tunable continuously over a wide spectral range. The device presents a most cost-effective solution for OEM applications from fiber optic networks to fiber sensing interrogation.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 1060nm · Power: Regular · Type: B-grade · Fiber Type: SMF-28 · Fiber Cover: 900um tube · Fiber Length: 1.0m · Connector: None
System integration
Integration and compatibility
Use these checks to connect Manual Grating Fiber Optic Tunable Filter – 0.08nm Bandwidth, 20nm Tuning to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, PM1550, HI1060, PM980, PM1300 · Fiber Cover: 900um tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1060nm, 1310nm, 1550nm
- Check the Optical Tunable Filters passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Manual Grating Fiber Optic Tunable Filter – 0.08nm Bandwidth, 20nm Tuning
Which fiber and connector does the Manual Grating Fiber Optic Tunable Filter – 0.08nm Bandwidth, 20nm Tuning use?
Fiber Type: SMF-28, PM1550, HI1060, PM980, PM1300 · Fiber Cover: 900um tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Manual Grating Fiber Optic Tunable Filter – 0.08nm Bandwidth, 20nm Tuning be included in an optical power budget?
Wavelength: 1060nm, 1310nm, 1550nm. Check the Optical Tunable Filters passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Manual Grating Fiber Optic Tunable Filter – 0.08nm Bandwidth, 20nm Tuning with the closest available models in the Optical Tunable Filters family.
| Selection parameter | Manual Grating Fiber Optic Tunable Filter – 0.08nm Bandwidth, 20nm Tuning (current) | Manual Etalon Tunable Fiber Optical Filters – 1nm Linewidth, 100nm Tuning | Manual Grating Fiber Optic Tunable Filters – 0.25nm Linewidth, 40nm Tuning |
|---|---|---|---|
| Wavelength range | 1060nm, 1310nm, 1550nm | 2100± 60nm, 2295± 55nm, 2195± 55nm, 2095± 55nm, 2050± 50nm, 2000± 50nm, 1960± 40nm, 1850± 50nm, 1800± 50nm, 1620± 40nm, 1550± 40nm, 1550± 50nm, 1480± 40nm, 1395± 55nm, 1310± 40nm, 1230± 50nm, 1145± 45nm, 1130± 40nm, 1060± 40nm, 1005± 45nm | 1060nm, 1310nm, 1550nm, 2000nm, 850nm, 950nm, 780nm, 630nm, 532nm, 430nm |
| Fiber type | SMF-28, PM1550, HI1060, PM980, PM1300 | SMF-28, HI1060, SM1950, PM980, PM1550, PM1310, PM1950 | SMF-28, PM1550, HI1060, PM980, PM1310, SM400, SM450, PM400, PM460, SM600, PM630, 780HP, PM780, SM800, PM850, SM980, 50/125, SM1950, PM1950 |
| Connector / control | None, FC/APC, Special | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, Special | None, FC/APC, HFPC, HFAPC, Special |
Related optical tunable filters
MEMS Fiber Optic Tunable Filter – 0.8nm Linewidth, 80nm Tuning
ITU Channel Tunable Filter SWDM, CWDM, WDM (100GHz), DWDM (50GHz)
Electrically Fiber Optic Grating Tunable Filter – 0.7nm Linewidth, 150nm Tuning
Thermally Tunable FBG Filter – 0.07nm Linewidth, 2nm Tuning- Electrically Fiber Optic Grating Tunable Filter – 0.25nm Linewidth, 40nm Tuning
- Manual Grating Fiber Optic Tunable Filters – 0.25nm Linewidth, 40nm Tuning