Couplers, Splitters & Combiners
2 x N Single Mode PLC Splitter
A planar lightwave circuit (PLC) splitter is an optical power management device fabricated using silica optical waveguide technology to distribute optical signals from the Central Office (CO) to multiple premise locations. Bare fiber splitter is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument, and WDM system, which minimizes space occupation.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength: 1310/1550 · Port: 2x2 · Package: Standard · Fiber Type: Ribbon · Fiber Length: 0.25 m · Input Connector: None · Output Connector: None
System integration
Integration and compatibility
Use these checks to connect 2 x N Single Mode PLC Splitter to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: Ribbon · Fiber Length: 0.25 m, 1.0 m
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1310/1550
- Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 2 x N Single Mode PLC Splitter
Which fiber and connector does the 2 x N Single Mode PLC Splitter use?
Fiber Type: Ribbon · Fiber Length: 0.25 m, 1.0 m. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 2 x N Single Mode PLC Splitter be included in an optical power budget?
Wavelength: 1310/1550. Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 2 x N Single Mode PLC Splitter with the closest available models in the Couplers, Splitters & Combiners family.
| Selection parameter | 2 x N Single Mode PLC Splitter (current) | 2×2 Double-Clad Fiber Couplers |
|---|---|---|
| Wavelength range | 1310/1550 | 780 nm, 1060 nm, 1310 nm, 1550 nm |
| Fiber type | Ribbon | 900um Jacket |
| Connector / control | None, FC/APC, Special | None, FC/PC, FC/APC |
Related couplers, splitters & combiners
2×2 Double-Clad Fiber Couplers- Polarization Maintaining (PM) Fiber Optic Couplers/Splitters – Large Port Count up to 1x120
1×3 Single Mode Monolithic Fiber Optic Coupler/Splitter
1x2/2x2 High Power Polarization Maintaining (PM) Fiber Optic Couplers/Splitters 30W- High Power 1x2, 2x2 Single Mode Fiber Optic Coupler/Splitter
- High Power 1x2, 2x2 Multimode Fiber Optic Coupler/Splitter