Couplers, Splitters & Combiners

1×2, 2×2 Fused PM Standard Fiber Tap

The standard-sized fused polarization maintaining fiber tap comes with low excess loss, high extinction ratio, high optical power handling, and Telcordia GR-1209 compliant test. It has a wide range of applications such as optical amplifiers, power monitoring, telecom systems, and testing equipment.

Configure & add to enquiry Datasheet (PDF)Back to Couplers, Splitters & Combiners

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

ConfigurationWavelengthGradePackageFiber TypeFiber LengthCoupling RatioConnector

We confirm the exact part number for your configuration on enquiry.

Configuration: 1×2 · Wavelength: 1310 · Grade: Premium · Package: Ø3.0x70 with 900µm loose tube · Fiber Type: Panda Fiber · Fiber Length: 0.25m · Coupling Ratio: 0.5/99.5 · Connector: None

Downloads

Datasheets & documents

1x2(2x2) Standard Fused PM FiberTap

System integration

Integration and compatibility

Use these checks to connect 1×2, 2×2 Fused PM Standard Fiber Tap to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Fiber Type: Panda Fiber · Fiber Length: 0.25m, 0.5m, 1.0m, 1.5m, 2.0m, Special; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength and loss budget: Wavelength: 1310, 1550, 1480; Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Technical FAQ

Integration questions for 1×2, 2×2 Fused PM Standard Fiber Tap

Which fiber and connector does the 1×2, 2×2 Fused PM Standard Fiber Tap use?

Fiber Type: Panda Fiber · Fiber Length: 0.25m, 0.5m, 1.0m, 1.5m, 2.0m, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

How should the 1×2, 2×2 Fused PM Standard Fiber Tap be included in an optical power budget?

Wavelength: 1310, 1550, 1480. Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Need this configured?

Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.

Configure & add to enquiry