Couplers, Splitters & Combiners

1×2 / 2×2 Single Mode Fiber Optic Coupler/Splitter 1310~2000nm, ±40nm

The FC Series fiber optic coupler is based on our fused biconical taper technology and compact packaging structure. It features good uniformity, low excess loss, and very low polarization sensitivity. The device is ideal for splitting or combining light with exceptional performance over a wide wavelength range

Configure & add to enquiry Datasheet (PDF)Back to Couplers, Splitters & Combiners

1×2 / 2×2 Single Mode Fiber Optic Coupler/Splitter 1310~2000nm, ±40nm

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

PortWavelengthGradePackageSplitting RatioFiber TypeFiber CoverFiber LengthConnector

We confirm the exact part number for your configuration on enquiry.

Port: 1x2 · Wavelength: 1625nm · Grade: P Grade · Package: 54(L) · Splitting Ratio: 01/99 · Fiber Type: SM28 · Fiber Cover: 250um fiber · Fiber Length: 0.5m · Connector: none

Downloads

Datasheets & documents

1x2 2x2 SM Standard fiber optic coupler

System integration

Integration and compatibility

Use these checks to connect 1×2 / 2×2 Single Mode Fiber Optic Coupler/Splitter 1310~2000nm, ±40nm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Fiber Type: SM28, SM1950 · Fiber Cover: 250um fiber, 900um tube, 2mm cable, 3mm cable; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength and loss budget: Wavelength: 1625nm, 1590nm, 1570nm, 1550nm, 1480nm, 1475nm, 1310nm, 2000nm, Special; Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Technical FAQ

Integration questions for 1×2 / 2×2 Single Mode Fiber Optic Coupler/Splitter 1310~2000nm, ±40nm

Which fiber and connector does the 1×2 / 2×2 Single Mode Fiber Optic Coupler/Splitter 1310~2000nm, ±40nm use?

Fiber Type: SM28, SM1950 · Fiber Cover: 250um fiber, 900um tube, 2mm cable, 3mm cable. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

How should the 1×2 / 2×2 Single Mode Fiber Optic Coupler/Splitter 1310~2000nm, ±40nm be included in an optical power budget?

Wavelength: 1625nm, 1590nm, 1570nm, 1550nm, 1480nm, 1475nm, 1310nm, 2000nm, Special. Check the Couplers, Splitters & Combiners passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Need this configured?

Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.

Configure & add to enquiry