Zolix · Motorized Stages
XY5050 Motorized XY Stage
Motorized XY stage with 50 × 50 mm X/Y travel and a 125×125 mm table. Transmission: precision ball screw φ6×1; guide: crossed-roller bearing guides. Repositioning accuracy ≤±1.5 µm; max speed 10 mm/s. Vertical load capacity 4 kg; weight 2.2 kg.
- Travel range (mm)
- X axis: 50 Y axis: 50
- Repositioning accuracy
- ≤±1.5 µm
- Table size
- 125×125 mm
- Central aperture
- 60×64 mm
Specifications
Mechanical
| Travel range (mm) | X axis: 50 Y axis: 50 |
|---|---|
| Table size (mm) | 125×125 |
| Central aperture (mm) | 60×64 |
| Transmission mechanism | Precision ball screw φ6×1 |
| Guide mechanism | Crossed-roller bearing guides |
| Body material and finish | Black anodized aluminum alloy |
| Shaft coupling, OD-bore-bore (mm) | 13-3-5 |
| Weight (kg) | 2.2 |
Accuracy
| Resolution, full/half step (µm) | 5/2.5 |
|---|---|
| Resolution, 20× microstep (µm) | 0.25 |
| Max speed (mm/s) | 10 |
| Repositioning accuracy (µm) | ≤±1.5 |
| Static parallelism (mm) | ≤0.1 |
| Dynamic straightness (µm/100 mm) | ≤10 |
| Dynamic parallelism (µm) | ≤25 |
| Orthogonality error (µm) | ≤15 |
| Backlash (µm) | ≤3 |
Motor & electrical
| Motor model | Shinano, STP-28D1003-08 |
|---|---|
| Motor current (A) | 1.3 |
| Motor holding torque (N·m) | 0.0785 |
| Stepper driver (optional) | Moons, SR2 |
Sensors & connection
| Clear aperture at travel limits (mm) | 35×47 |
|---|---|
| Connector | DB9 (pin) |
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Limit sensors per axis (built-in) | 2×GP1S09xHCPI (SHARP, Japan) |
| Origin sensor per axis (built-in) | 1×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | NPN open-collector output. DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Vertical load capacity (kg) | 4 |
|---|
Compatible controllers
For the two-phase 28 stepping motor this stage uses.