Zolix · Motorized Stages
XY120120 Motorized XY Stage
Motorized XY stage with 120 × 120 mm X/Y travel and a 280×280 mm table. Transmission: precision ball screw φ16×4; guide: crossed-roller bearing guides. Repositioning accuracy ≤±3 µm; max speed 40 mm/s. Vertical load capacity 20 kg; weight 7 kg.
- Travel range (mm)
- X axis: 120 Y axis: 120
- Repositioning accuracy
- ≤±3 µm
- Table size
- 280×280 mm
- Central aperture
- 188×188 mm
Specifications
Mechanical
| Travel range (mm) | X axis: 120 Y axis: 120 |
|---|---|
| Table size (mm) | 280×280 |
| Central aperture (mm) | 188×188 |
| Transmission mechanism | Precision ball screw φ16×4 |
| Guide mechanism | Crossed-roller bearing guides |
| Body material and finish | Black anodized aluminum alloy |
| Shaft coupling, OD-bore-bore (mm) | 20-5-10 |
| Weight (kg) | 7 |
Accuracy
| Resolution, full/half step (µm) | 20/10 |
|---|---|
| Resolution, 20× microstep (µm) | 1 |
| Max speed (mm/s) | 40 |
| Repositioning accuracy (µm) | ≤±3 |
| Backlash (µm) | ≤5 |
| Static parallelism (mm) | ≤0.1 |
| Dynamic straightness (µm/100 mm) | ≤10 |
| Dynamic parallelism (µm) | ≤25 |
| Orthogonality error (µm) | ≤60 |
Motor & electrical
| Motor model | Shinano, SST43D2126 |
|---|---|
| Motor current (A) | 1.7 |
| Motor holding torque (N·m) | 0.456 |
| Stepper driver (optional) | Moons, SR2 |
Sensors & connection
| Clear aperture at travel limits (mm) | 128×128 |
|---|---|
| Connector | DB9 (pin) |
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Limit sensors per axis (built-in) | 2×PM-L25 (SUNX, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | NPN open-collector output; DC5~24v 50mA or less |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Vertical load capacity (kg) | 20 |
|---|
Compatible controllers
For the two-phase 42 stepping motor this stage uses.