Zolix · Motorized Stages
LA150-60 Motorized Linear Stage
Motorized linear stage with 150 mm travel and a 60×60 mm table. Transmission: ball screw φ8×2; guide: linear-slider guides. Repositioning accuracy ≤±2 µm; max speed 20 mm/s. Horizontal load capacity 4 kg; weight 1 kg.
- Travel range
- 150 mm
- Repositioning accuracy
- ≤±2 µm
- Horizontal load capacity
- 4 kg
- Table size
- 60×60 mm
Specifications
Mechanical
| Travel range (mm) | 150 |
|---|---|
| Table size (mm) | 60×60 |
| Transmission mechanism | Ball screw φ8×2 |
| Guide mechanism | Linear-slider guides |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 1 |
Accuracy
| Resolution, full/half step (µm) | 10/5 |
|---|---|
| Resolution, 20× microstep (µm) | 0.5 |
| Max speed (mm/s) | 20 |
| Repositioning accuracy (µm) | ≤±2 |
| Static clearance (µm) | ≤1 |
| Backlash (µm) | ≤3 |
| Static parallelism (mm) | ≤0.08 |
| Dynamic straightness (µm) | ≤20 |
| Dynamic parallelism (µm) | ≤30 |
| Minimum incremental motion (µm) | ≤2 |
Motor & electrical
| Repositioning accuracy, microstepping (µm) | ≤±1 |
|---|---|
| Backlash, microstepping (µm) | ≤0.5 |
| Motor and step angle (°) | Two-phase 28 stepping motor, 1.8 |
| Motor model | Shinano, STP-28D1003-08 |
| Motor current (A) | 1.3 |
| Motor torque (N·m) | 0.0785 |
| Stepper driver (optional) | Moons, SR2 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Limit sensors (built-in) | 2×GP1S09xHCPI (SHARP, Japan) |
| Origin sensor (built-in) | 1×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | NPN open-collector output DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Horizontal load capacity (kg) | 4 |
|---|---|
| Vertical load capacity (kg) | 2 |
| Inverted load capacity (kg) | 2 |
Compatible controllers
For the two-phase 28 stepping motor this stage uses.