Mightex · 9 product pages · 33 part numbers
LEDs need a constant-current driver. Manual and analog drivers set current with a knob or a 0–5 V input; the BioLED software and TTL control modules add programmed pulses and triggers with microsecond timing; the PolyEcho module synchronises lights, cameras and behavioural hardware against one clock, and PolyScan software ties Mightex hardware together.
9 of 9 LED Controllers, Triggering & Software pages
Product familySystem control and software
Four-channel module with a TTL trigger input and a 0–5 V analog output per channel, programmed over USB or RS232, to drive up to four manual/analog BLS LED drivers from software.
SystemSystem control and software
Event-driven trigger and synchronisation module: 4 or 12 TTL inputs, TTL and analog outputs, unified timestamps for every event, and trigger delays under 20 µs, programmed in PolyScan.
SystemSystem control and software
Mightex control and acquisition software for Polygon, OASIS, PolyEcho, Mightex cameras and LED controllers, with a Pro tier for selected third-party cameras.
Product familySoftware and TTL LED controllers
Two- and four-channel BioLED control modules for Mightex BLS LED sources: 20 µs time resolution, 0.1% intensity steps, a TTL trigger per channel, USB or RS232 control, and an optional touch-screen pad.
Product familyManual and analog LED drivers
Single-channel drivers for Mightex Type-H super high-power LEDs: BLS-13000-1E up to 13 A, BLS-18000-1N up to 18 A and BLS-27000-1 up to 27 A, with manual or 0–5 V analog control and up to 3 kHz modulation.
Product familyManual and analog LED drivers
Two-channel manual and analog-input drivers for Mightex LEDs: BLS-1000-2 with 500/750/1,000 mA limit settings and up to 100 kHz modulation, BLS-3000-2 with 1,000/2,000/3,000 mA and up to 50 kHz.
Product familyManual and analog LED drivers
Mightex’s SLA-series two-channel universal LED drivers with two control modes: Manual Knob Control Mode: the current output of each channel can be adjusted manually Analog Input Control Mode: the current output of each channel can be controlled via 0~5V analog input.
Product familyManual and analog LED drivers
Mightex’s SLB-1200-1 universal LED driver is designed for driving a broad range of LED light sources with two control modes: Manual Knob Control Mode: the output current can be adjusted manually; and
AccessoriesAccessories
Cables, BNC leads, push-pull connector pairs, power supplies and mains plug adapters for Mightex LED controllers and drivers.
Manufactured by Mightex. Precisometer is a Mightex distribution partner: we quote, integrate and support Mightex products, with in-person support in the Netherlands and Belgium.