Mightex · Manual and analog LED drivers
Mightex’s SLA-series two-channel universal LED drivers with two control modes: Manual Knob Control Mode: the current output of each channel can be adjusted manually Analog Input Control Mode: the current output of each channel can be controlled via 0~5V analog input.
Manufactured by Mightex. Precisometer is a Mightex distribution partner: we quote, integrate and support Mightex products, with in-person support in the Netherlands and Belgium.
From Mightex
Mightex’s SLA-series two-channel universal LED drivers are designed to drive a broad range of LED light sources. These LED drivers have two control modes:
The control mode is set via a DIP switch, and the factory default setting is “Manual Knob Control Mode”. The drivers also have a Maximum Current Setting DIP Switch, which allows user to set the maximum current to different levels, in order to prevent LED damage due to overdriving. The factory default setting is 30mA for SLA-0100-2, and 350mA for both SLA-1000-2 and SLA-1200-2. When the Maximum Current Setting DIP Switch is set at a smaller value (e.g. 350mA), the LED driver has a finer resolution for the output current.
When the driver is set to “Analog Input Control Mode”, the output current is proportional to the voltage of the analog input signal. The operational mode and the current limit of each channel can be set independently from each other.
Configurations
| Part number | Max Output Current | Mightex description | Add to enquiry |
|---|---|---|---|
| SLA-1200-2 | 1200 mA | Two-channel LED driver with manual and analog-input controls, max. current 1200mA | |
| SLA-0100-2 | 100 mA | Two-channel LED driver with manual and analog-input controls, max. current 100mA | |
| SLA-1000-2 | 1000 mA | Two-channel LED driver with manual and analog-input controls, max. current 1000mA |
Specifications
| Parameters | SLA-0100-2 | SLA-1000-2 | SLA-1200-2 | Unit |
|---|---|---|---|---|
| Number of Channels | 2 | 2 | 2 | |
| Power Supply Input Voltage (Vdc) | 9 ~ 24 | 9 ~ 24 | 9 ~ 24 | V |
| Maximum Output Voltage (Vmax ) 1 | < 21 | < 21 | < 21 | V |
| Maximum Per Channel Output Current (Imax ) 2 | 100 | 1000 | 1200 | mA |
| Maximum Per Channel Output Power (Pmax ) 3 | 2 | 10 | 10 | W |
| Max Modulation Frequency | 50 | 1 | 1 | KHz |
| Tiered Max. Current Settings | 30, 50 and 100 | 350, 500 and 1,000 | 350, 750 and 1,200 | mA |
| Pin Label | LED+ | LED- | Analog Signal | Analog Input GND |
|---|---|---|---|---|
| Description | LED Anode | LED Cathode | 0~5V Analog Input | Analog Input Ground |
| Dimension | 80mm (L) x 64.3mm (W) x 23.7mm (H) |
|---|---|
| Weight | 60g |
Reproduced from Mightex (official page), retrieved 2026-10-15.
Ordering and integration
Combining this with other equipment? Ask for an integration check.
Downloads
Manual and analog LED drivers
Product familyManual and analog LED drivers
Single-channel drivers for Mightex Type-H super high-power LEDs: BLS-13000-1E up to 13 A, BLS-18000-1N up to 18 A and BLS-27000-1 up to 27 A, with manual or 0–5 V analog control and up to 3 kHz modulation.
Product familyManual and analog LED drivers
Two-channel manual and analog-input drivers for Mightex LEDs: BLS-1000-2 with 500/750/1,000 mA limit settings and up to 100 kHz modulation, BLS-3000-2 with 1,000/2,000/3,000 mA and up to 50 kHz.
Product familyManual and analog LED drivers
Mightex’s SLB-1200-1 universal LED driver is designed for driving a broad range of LED light sources with two control modes: Manual Knob Control Mode: the output current can be adjusted manually; and
All led controllers, triggering & software |Find my solution