Pulse energy, repetition rate, pulse width
NS-FH-532532 nm green pulsed laser
532 nmNS-FH-532 is a 532 nm Pulsed laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. Cooling: Water cooled. Key specifications: pulse energy 100 uJ, repetition rate 0.2-10 MHz, pulse width 2-10 ns @1.5 MHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
NS-FH-532
24 specification rows
| Pulse energy | 100 uJ |
|---|---|
| Repetition rate | 0.2-10 MHz |
| Pulse width | 2-10 ns @1.5 MHz |
| Beam / notes | Cooling: Water cooled |
| Operating mode | Pulsed |
| Average power | 1-30 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 | <1.3 |
| Beam divergence, full angle (mrad) | <1 |
| Polarization ratio | >100:1 Horizontal |
| Cooled method | Water cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Single pulse energy (uJ) | 100μJ@200kHz；30μJ@1MHz；20μJ@1.5MHz |
| Rep. rate | 0.2-10MHz |
| Pulse duration (ns) | 2-10@1.5MHz |
| Peak power (MW) | 1-20 |
| M² | <1.3 |
| Beam diameter at the aperture (1/e2,mm) | <3 |
| Beam height from base plate (mm) | 114 |
Applications
Uses named on this model’s datasheet.
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Film scribing
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the NS-FH-532 with nearby pulsed lasers across the wavelength range.
