Pulse energy, repetition rate, pulse width
FS-H-1030E1030 nm near-infrared high-power pulsed laser
1030 nmFS-H-1030E is a 1030 nm Pulsed laser. Used for optical microscope, photon imaging, physics experiment. <250fs @80 MHz. Key specifications: operating mode Pulsed, output / average power 50~100 W, rep. rate 20-120. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FS-H-1030E
23 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 50~100 W |
| Beam / notes | <250 fs @80 MHz |
| Rep. rate | 20-120 |
| pulse | duration, / high |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 | <1.3 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±10 |
| Average power (W) | 50-100(100W@40MHz&80MHz) |
| Single pulse energy (uJ) | 1.25-2.5(1250nJ@40MHz) |
| Pulse duration (fs) | <250 |
| Group Delay Dispersion4(fs2) | -60000-0 |
| M² | <1.3 |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <3 |
| Beam height from base plate (mm) | 108 |
Applications
Uses named on this model’s datasheet.
- Optical microscope
- Photon imaging
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the FS-H-1030E with nearby pulsed lasers across the wavelength range.
