Pulse energy, repetition rate, pulse width
FS-H- 1030D1030 nm near-infrared high-power pulsed laser
1030 nmFS-H- 1030D is a 1030 nm Pulsed laser. Used for optical microscope, photon imaging, physics experiment. Key specifications: operating mode Pulsed, output / average power 20-50 W, repetition rate 80±2 MHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FS-H- 1030D
24 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 20-50 W |
| Repetition rate | 80±2 MHz |
| pulse | duration, / high |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 | <1.2 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Pulse width | <250 @80 MHz |
| Wavelength (nm) | 1030±10 |
| Average power (W) | 20-50(50W@40MHz&80MHz) |
| Single pulse energy (nJ) | 625-1250(1250nJ@40MHz) |
| Rep. rate (MHz) | 20-120 |
| Pulse duration (fs) | <250 |
| Group Delay Dispersion4(fs2) | -60000-0 |
| M² | <1.2 |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <2 |
| Beam height from base plate (mm) | 118 |
Applications
Uses named on this model’s datasheet.
- Optical microscope
- Photon imaging
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the FS-H- 1030D with nearby pulsed lasers across the wavelength range.
