Pulse energy, repetition rate, pulse width
FS-H- 1030B1030 nm near-infrared pulsed laser
1030 nmFS-H- 1030B is a 1030 nm Pulsed laser. Used for optical microscope, photon imaging, physics experiment. Key specifications: operating mode Pulsed, output / average power 500-3000 mW, repetition rate 80±2 MHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FS-H- 1030B
24 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 500-3000 mW |
| Repetition rate | 80±2 MHz |
| Single pulse energy (nJ) | 6.25-30 |
| Pulse | <150 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 | <1.2 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Pulse width | <150 @80 MHz |
| Wavelength (nm) | 1030±10 |
| Average power (mW) | 500-3000 |
| Rep. rate (MHz) | 80±2 |
| Pulse duration(fs) | <150 |
| Group Delay Dispersion(fs2) | -60000-0 |
| M² | <1.2 |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <2 |
| Beam height from base plate (mm) | 43 |
Applications
Uses named on this model’s datasheet.
- Optical microscope
- Photon imaging
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the FS-H- 1030B with nearby pulsed lasers across the wavelength range.
