Pulse energy, repetition rate, pulse width
FS-F- 1030C1030 nm near-infrared high-power pulsed laser
1030 nmFS-F- 1030C is a 1030 nm Pulsed laser. Used for optical microscope, photon imaging, physics experiment. Key specifications: operating mode Pulsed, output / average power 20-50 W, repetition rate 1 MHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FS-F- 1030C
23 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 20-50 W |
| Repetition rate | 1 MHz |
| Pulse | <300 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Beam quality(M2) | <1.2 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Pulse width | <300 @1MHz |
| Wavelength (nm) | 1030±10 |
| Average power (W) | 20-50(50W@1MHz) |
| Single pulse energy (uJ) | 20-50(50uJ@1MHz) |
| Rep. Rate (kHz) | 100-1000 |
| Pulse duration(fs) | <300 |
| Peak power (MW) | 67-167@1MHz |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <2 |
| Beam height from base plate (mm) | 118 |
Applications
Uses named on this model’s datasheet.
- Optical microscope
- Photon imaging
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the FS-F- 1030C with nearby pulsed lasers across the wavelength range.
