28 models · 2 series
Infrared Laser, 940 NM Infrared Diode Lasers, High Power Diode Laser System.
24 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (℃) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Operating voltage(internal) | Operating voltage(external PCB1) | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-940L | 940 nm | 1~250 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-940 | 940 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-940 | 940 nm | 1~4.5 W | – | Multimode | <1%, <0.5% | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-940-SM | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-940 | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940L | 940 nm | 1~250 mW | <2%, <1%, <0.5% | – | – | <1.5 | <1.0 | – | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940R | 940 nm | 1~350 mW | <3%, <2%, <1% | Round | – | – | ~10 / ~20 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940 | 940 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-940 | 940 nm | 1~4.5 W | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-940 | 940 nm | 4.5~6 W | – | Multimode | – | – | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-940-SM | 940 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-940 | 940 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-940 | 940 nm | 1~10 mW | – | – | – | – | – | – | – | -10°C to +45°C | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-F-940 | 940 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-940 | 940 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC (TTL10kHz, optional) | 5VDC(TTL30kHz or Analog 0-3V,0-5V, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-940 | 940 nm | 1~100 mW | – | Near TEM00 | – | – | <1 | – | – | – | – | 10000 | – | – | – | – | Cable with flying leads | – | – | – | 3VDC (TTL10kHz, optional) | 5VDC(TTL30kHz or Analog 0-3V,0-5V, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | Datasheet |
| PGL-FP-940 | 940 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-940 | 940 nm | 1~1500 mW | – | Multimode | – | – | <10 | – | – | – | – | 10000 | – | – | – | – | 9 pin connector | – | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
| PGL-V-H-FC-940 | 940 nm | 1~1000 mW | – | Multimode | – | – | <10 | – | – | – | – | 10000 | – | – | – | – | 9 pin connector | – | – | – | – | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | Datasheet |
| MDL-E-940 | 940 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-940 | 940 nm | 1~300 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-940 | 940 nm | 1~60 mW | <2%, <1%, <0.5% | Multimode | – | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-940 | 940 nm | 1~100 mW | <2%, <1%, <0.5% | – | – | – | – | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-940 | 940 nm | 1~100 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | – | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
High Power Laser Diode Module |
4 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Cladding Diameter | Fiber Buffer Diameter | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature(10 s max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-940-100-2 | 940 nm | 100 W | - / 15.4 / - / V | - / 200 / - / μm | - / 220 / - / μm | - / 500 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | Datasheet |
| LDM-940-170-1 | 940 nm | 170 W | 32 / V | 105 / μm | - / 125 / - / - | 250 / - | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 / ℃ | - / 90 / % | – | Datasheet |
| LDM-940-200-2 | 940 nm | 200 W | 31 / V | 200 / μm | - / 220 / - / μm | - / 500 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | Datasheet |
| LDM-940-80-1 | 940 nm | 80 W | - / 14.4 / - / V | - / 105 / - / μm | - / 125 / - / μm | - / 250 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.