Back to Home

Pulse energy, repetition rate, pulse width

MDL-PS-655655 nm red pulsed laser

655 nm

The MDL-PS-655 is a 655 nm picosecond direct diode laser. Electrical current creates optical gain in a semiconductor junction, and the diode generates the laser light directly. Optical feedback selects the oscillating modes, while drive current and junction temperature affect output power and wavelength. Pulse duration sets how briefly the energy is delivered, while repetition rate sets the interval between pulses; average power alone does not describe the peak intensity at the sample.

Specifications

MDL-PS-655

19 specification rows

Operating modePulsed
Output / average power1~50 mW
Beam / notesPulse width 100~1000 ps
Power stability (rms, 4 hours ± 3°C)<2%, <1%, <0.5%
M2<1.5 / <1.2
Beam divergence, full angle (mrad)<1.0
Warm-up time (minutes)<5
Cooled methodConduction
Operating temperature (°C)10-35
Power supply (100-240VAC)PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM
Expected lifetime (hours)>10000
Central wavelength (nm)655±10
Peak power (mW)1-50
Pulse width (ps)100-1000
Transverse modeNear TEM00
Rep. rate100kHz-20MHz
Beam diameter at the aperture (1/e2, mm)~1.2
Beam height from base plate (mm)26.5
Operating voltage (VDC)12V/3.34A

What do you need?

Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare MDL-PS-655 with the closest available models in the Pulsed Lasers family.

Selection parameterMDL-PS-655 (current)MDL-NS-655PGL-D8-655
Wavelength655 nm655 nm655 nm
Optical power / pulse energy1~50 mW1~180 mW1~50 mW
Operating mode / pulse widthPulsedPulsedPulsed
Beam qualityNear TEM00<1.2Near TEM00