Technology guide
Ti:sapphire lasers: gain, tuning and pulses
Separate the titanium-doped gain medium, optical pump and resonator tuning when comparing Ti:sapphire sources.
- 01Optical pump
- 02Ti:sapphire gain
- 03Resonator selection
- 04Output
How it works
- Ti:sapphire uses titanium ions in a sapphire host as its gain medium. Optical pumping supplies the excitation energy.
- Its broad gain supports tunability, but the installed optics and pump configuration set the useful tuning range and output conditions.
- CW, Q-switched and mode-locked implementations have different temporal behaviour. A Ti:sapphire label alone does not identify which one is supplied.
- For ultrashort pulses, dispersion and the measurement method affect the reported pulse duration. A nominal pulse-width value is incomplete without its conditions.
What to compare
| Parameter | Check in the specification |
|---|---|
| Tuning coverage | Check available power and beam behaviour across the required wavelengths. |
| Pump arrangement | Confirm pump source, optical delivery and whether the pump hardware is included. |
| Pulse specification | Keep repetition rate, pulse energy and duration with any deconvolution assumption. |
| Integration | Check cooling, synchronization and external control interfaces. |
Integration
- Choose the wavelength and timing requirements before selecting a cavity option.
- Read the complete head and pump-system specification together.
- Do not transfer a mode-locking or Q-switch mechanism from a similarly named model.
Related products
- TUN-TiA-770-840
Head cooling: Water Cooled.
- TUN-TiL-780-850
- TUN-Ti-740~840
References
Discuss the configuration. Send the wavelength, output, pulse or CW mode and control requirements.