Technology guide
Mode-locked lasers: pulse trains and dispersion
Separate pulse duration, repetition rate, dispersion and synchronization when using a mode-locked source.
- 01Resonator modes
- 02Phase relationship
- 03Pulse train
- 04Experiment
How it works
- Mode locking establishes a phase relationship between resonator modes so their fields combine into a train of short pulses.
- Repetition rate and pulse width describe different properties. The time between pulses is the reciprocal of repetition frequency; it is not the pulse duration.
- Active and passive mode-locking implementations differ. A pulse width by itself does not disclose a saturable absorber, SESAM or Kerr-lens arrangement.
- Dispersion and external optics can stretch pulses after they leave the laser. A source-head pulse specification may not describe the pulse at the sample.
What to compare
| Parameter | Check in the specification |
|---|---|
| Pulse width | Keep the measurement method and deconvolution assumption with the result. |
| Spectrum | Compare spectral bandwidth and pulse shape before applying transform-limit estimates. |
| Repetition rate | Check fixed, tunable and pulse-picked operation as separate configurations. |
| Timing | Specify synchronization bandwidth, timing jitter and accessible clock outputs. |
Integration
- Calculate pulse energy using average power and the actual repetition rate only for the applicable operating regime.
- Budget dispersion through windows, fibers and microscope optics.
- Confirm the pulse width required at the experiment after the delivery optics.
Related products
- FL-1030-PS
Fiber interface: FC/APC, Collimator optional.
- FL-266-PS
- FL-343-PS
References
Discuss the configuration. Send the wavelength, output, pulse or CW mode and control requirements.