Technology guide
Integrating spheres: diffuse reflections and measurement geometry
Use a calibrated sphere arrangement for collection or uniform-source work, while accounting for ports, coatings and substitution effects.
- 01Input light
- 02Diffuse reflections
- 03Port field
- 04Detector
How it works
- An integrating sphere redistributes light through repeated diffuse reflections from its inner surface. Its behaviour depends on wall reflectance and the geometry of ports and internal structures.
- Source and measurement arrangements use the sphere differently. A sphere accessory does not by itself establish calibrated total flux, reflectance or radiance.
- Ports, baffles and mounted samples perturb the optical field. Calibration must correspond to the actual measurement geometry.
- Coating response varies with wavelength, and contamination can affect performance. The useful band is a property of the complete assembly and calibration.
What to compare
| Parameter | Check in the specification |
|---|---|
| Measurement quantity | Define flux, reflectance, transmittance or radiance before selecting geometry. |
| Port arrangement | Check input, sample and detector positions and any baffles. |
| Spectral response | Use coating and detector calibration over the required band. |
| Calibration | Account for reference standards and substitution or sample-loading effects. |
Integration
- Use the documented measurement sequence and reference configuration.
- Check whether detectors and calibrated readout electronics are included.
- Retain the actual source geometry and sample conditions when comparing sphere measurements.
Related products
References
Discuss the configuration. Send the wavelength, beam or image geometry and mechanical interfaces.