Coupling & source accessories
Source Coupling, Filters & Output Accessories
A reviewed accessory range for GLORIA lamp sources and TLS monochromatic systems. Configure sealed light paths, filter holders, beam control, fibre coupling and integrating-sphere output as one optical path.
Best suited to
Connecting a compatible source to a monochromator, fibre, sphere or free-space experiment.
Selecting a configuration
Specify the source, monochromator slit type, beam height, wavelength interval and output geometry. Mechanical fit alone does not establish spectral or thermal suitability.
Measurement & configuration
- LHP150 and TLS-F adapters for compatible source-to-monochromator paths.
- LFM filter holders, LMI50 iris and LBT46 right-angle beam turning.
- Glass / quartz fibre coupling and four integrating-sphere diameters.
Plan the signal path
- 1Compatible source
- 2Filter, adapter & beam control
- 3Fibre / sphere / free space
Specifications
| GLORIA accessory interface | 59 mm mechanical interface; 46 mm clear aperture |
|---|---|
| LMI50 iris | Manual 2–50 mm aperture |
| LFM2-50 filter format | 50 / 50.8 mm round or square; up to 10 mm thickness |
| FCM fibre options | Glass or quartz; SMA905 version available |
| TLS-F compatibility | Source adapters for compatible manual-slit monochromators |
Integrating-sphere output formats
| Model | Sphere diameter | Port diameter |
|---|---|---|
| IS-050-14T | 50 mm | 14 mm |
| IS-100-25 | 100 mm | 25 mm |
| IS-150-38 | 150 mm | 38 mm |
| IS-200-50 | 200 mm | 50 mm |
Sphere uniformity above 98% was measured with a specific TLS3-X150A configuration at 555 nm; it is not a universal specification for every source and wavelength.
Configuration note: A heat filter is required when using LMI50 with sources of 200 W or more.
Configure GLORIA / TLS source accessories
Send the wavelength interval, signal level, timing and sample requirements for your experiment.