Technology guide
Fluorescence spectrometers: excitation and emission paths
Plan source selection, wavelength discrimination and sample geometry around the fluorescence signal and its backgrounds.
- 01Selected excitation
- 02Sample
- 03Emission selection
- 04Detector
How it works
- A fluorescence measurement illuminates a sample in an excitation band and records emitted light. Excitation selection and emission analysis are separate optical functions.
- Filters or monochromators define the spectral bands. The chosen bandwidth changes both collected signal and spectral discrimination.
- Scattered excitation, sample absorption and background can affect the recorded emission. Optical geometry and reference procedures matter alongside detector sensitivity.
- An excitation–emission matrix measures fluorescence across both excitation and emission wavelength settings. It is different from a single emission scan.
What to compare
| Parameter | Check in the specification |
|---|---|
| Excitation path | Match source output, wavelength selection and sample illumination. |
| Emission path | Specify detection band, bandwidth and rejection of excitation light. |
| Sample handling | Check cuvette, surface, fiber or microscope geometry. |
| Measurement conditions | Retain integration time, gain, reference standard and sample concentration conditions. |
Integration
- Choose spectral bands using the sample's excitation and emission behaviour.
- Check which filters, holders and detectors are supplied with the selected configuration.
- Do not treat a detection limit measured with one reference solution as universal for every fluorophore or sample matrix.
Related products
References
Discuss the configuration. Send the sample format, spectral range, resolution and detection requirements.