Technology guide
Balanced photodetection: subtraction and channel matching
Use differential optical signals while checking common-mode rejection, total input power and channel matching.
- 01Optical channels
- 02Matched detectors
- 03Subtraction
- 04Differential output
How it works
- A balanced receiver measures the difference between two detector-channel signals. Signals common to both channels can be reduced by subtraction.
- Rejection depends on optical balance and the matching of detector and electronic responses. A nominal common-mode rejection figure is frequency dependent.
- A small differential output does not imply that either individual detector is receiving little light. Total optical input can still saturate a channel.
- Balanced detection is useful when the wanted signal appears differentially and unwanted contributions are correlated. It does not remove uncorrelated noise from both channels.
What to compare
| Parameter | Check in the specification |
|---|---|
| Responsivity balance | Match wavelength and optical delivery to both channels. |
| Input power | Check limits per detector as well as the differential output range. |
| Bandwidth | Compare transimpedance gain, frequency response and common-mode rejection together. |
| Interfaces | Check AC or DC coupling, output impedance and monitoring outputs. |
Integration
- Balance the optical paths under the actual operating conditions.
- Include delays and polarization changes that can produce frequency-dependent imbalance.
- Specify individual channel powers and the differential signal when selecting receiver gain.
Related products
References
Discuss the configuration. Send the wavelength, signal level, active area and bandwidth requirements.