Back to Home

Microscopy Cameras/Microscope Cameras

E3ISPM45000KPB

E3ISPM45000KPB Microscopy Cameras/Microscope Cameras with IMX492 (C,RS) sensor, 45M (8176×5616) for professional imaging.

Sensor
IMX492 (C,RS)
Resolution
45M (8176×5616)
Pixel Size
2.315 µm × 2.315 µm
Frame Rate
8.1 fps @ 8176×5616(C); 30.0 fps @ 4080×2808(M); 8.1 fps @ 7408×5556(C); 33.0 fps @ 3696×2778(M); 10.4 fps @ 8176×4320(C); 34.7 fps @ 4096×2160(M); 62.5 fps @ 2048×1080(M); 86.5 fps @ 1344×720(M)
Interface
USB3.0
E3ISPM45000KPB

Application context

Why this design is used

Scientific imaging

E3ISPM45000KPB: The IMX492 (C,RS) sensor, 45M (8176×5616) resolution, and 2.315 µm × 2.315 µm pixels defines the sensitivity, sampling and field coverage available for Scientific imaging. The 8.1 fps @ 8176×5616(C); 30.0 fps @ 4080×2808(M); 8.1 fps @ 7408×5556(C); 33.0 fps @ 3696×2778(M); 10.4 fps @ 8176×4320(C); 34.7 fps @ 4096×2160(M); 62.5 fps @ 2048×1080(M); 86.5 fps @ 1344×720(M) frame-rate listing also sets the fastest full-frame acquisition regime.

Instrument integration

E3ISPM45000KPB: The IMX492 (C,RS) sensor, 45M (8176×5616) resolution, and 2.315 µm × 2.315 µm pixels defines the sensitivity, sampling and field coverage available for Instrument integration. The 8.1 fps @ 8176×5616(C); 30.0 fps @ 4080×2808(M); 8.1 fps @ 7408×5556(C); 33.0 fps @ 3696×2778(M); 10.4 fps @ 8176×4320(C); 34.7 fps @ 4096×2160(M); 62.5 fps @ 2048×1080(M); 86.5 fps @ 1344×720(M) frame-rate listing also sets the fastest full-frame acquisition regime.

Specifications

E3ISPM45000KPB

22 specification rows

The E3ISPM45000KPB is a microscopy camera in the E3ISPM series, built around a IMX492 (C,RS) sensor, 45M (8176×5616) resolution, 2.315 µm × 2.315 µm pixels, frame rates up to 8.1 fps @ 8176×5616(C); 30.0 fps @ 4080×2808(M); 8.1 fps @ 7408×5556(C); 33.0 fps @ 3696×2778(M); 10.4 fps @ 8176×4320(C); 34.7 fps @ 4096×2160(M); 62.5 fps @ 2048×1080(M); 86.5 fps @ 1344×720(M), a USB3.0 interface. It suits microscopy cameras/microscope cameras where reliable imaging performance and interface compatibility matter.

Key Parameters

ModelE3ISPM45000KPB
SensorIMX492 (C,RS)
Effective Pixels / Resolution45M (8176×5616)
Frame Rate (Full Resolution)8.1 fps @ 8176×5616(C); 30.0 fps @ 4080×2808(M); 8.1 fps @ 7408×5556(C); 33.0 fps @ 3696×2778(M); 10.4 fps @ 8176×4320(C); 34.7 fps @ 4096×2160(M); 62.5 fps @ 2048×1080(M); 86.5 fps @ 1344×720(M)
Shutter TypeRolling Shutter
Color TypeColor

Imaging Performance

Pixel Size2.315 µm × 2.315 µm
Sensor Size18.93 mm × 13.00 mm
Diagonal4/3" (22.96 mm)
Dynamic RangeAvailable on request
Bit Depth8/12-bit
Sensitivity108 mV with 1/30s; 0.03 mV with 1/30s

Interface & Mechanical

Data InterfaceUSB3.0
GPIOAvailable on request
Lens MountC-mount
DimensionsAvailable on request
WeightAvailable on request
Power SupplyUSB3.0 interface power (compatible with USB2.0)

Environment & Certification

Operating Temperature / Humidity10 °C ~ +50 °C / 30%~80%RH
Storage Temperature / Humidity20 °C ~ +60 °C / 10%~60%RH
Operating SystemWindows/Linux/macOS/Android multi-platform SDK (native C/C++, C#/VB.NET, Python, Java, DirectShow, TWAIN, etc.)
CertificationCE, FCC

System integration

Integration and compatibility

Use these checks to connect E3ISPM45000KPB to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Lens and microscope interface
Lens Mount: C-mount
Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.
Sensor and sampling
Sensor: IMX492 (C,RS) · Resolution: 45M (8176×5616)
Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.
Interface and data rate
Frame Rate: 8.1 fps @ 8176×5616(C); 30.0 fps @ 4080×2808(M); 8.1 fps @ 7408×5556(C); 33.0 fps @ 3696×2778(M); 10.4 fps @ 8176×4320(C); 34.7 fps @ 4096×2160(M); 62.5 fps @ 2048×1080(M); 86.5 fps @ 1344×720(M) · Interface: USB3.0
Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.
Hardware synchronization
GPIO: Available on request
Confirm edge polarity, pulse-width limits and whether each line is opto-isolated before connecting TTL or GPIO signals. A software exposure command is not equivalent to a hardware trigger.
Cooling and noise floor
Dynamic Range: Available on request
Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Technical FAQ

Integration questions for E3ISPM45000KPB

What lens mount is required for the E3ISPM45000KPB?

Lens Mount: C-mount. Use a lens image circle that covers the sensor and check flange distance before adding C/CS, F-mount or M42 adapters.

What sensor and pixel pitch does the E3ISPM45000KPB use?

Sensor: IMX492 (C,RS) · Resolution: 45M (8176×5616). Match pixel pitch to the diffraction-limited spot the optics deliver. Sampling finer than the optics resolve multiplies data volume without adding information; sampling coarser discards resolution you have paid for.

How does the E3ISPM45000KPB connect to the acquisition computer?

Frame Rate: 8.1 fps @ 8176×5616(C); 30.0 fps @ 4080×2808(M); 8.1 fps @ 7408×5556(C); 33.0 fps @ 3696×2778(M); 10.4 fps @ 8176×4320(C); 34.7 fps @ 4096×2160(M); 62.5 fps @ 2048×1080(M); 86.5 fps @ 1344×720(M) · Interface: USB3.0. Confirm the host can sustain the interface bandwidth continuously, not in burst. A camera that outruns the write path stalls acquisition rather than dropping quietly to a lower rate.

Does the E3ISPM45000KPB support hardware triggering?

GPIO: Available on request. Confirm edge polarity, pulse-width limits and whether each line is opto-isolated before connecting TTL or GPIO signals. A software exposure command is not equivalent to a hardware trigger.

What is the noise performance of the E3ISPM45000KPB?

Dynamic Range: Available on request. Judge these figures at the exposure time you will actually use. Cooling matters where dark current accumulates over seconds; read noise dominates short exposures where it never does.

Need help choosing?

Tell us your sensor, resolution, spectral range, frame-rate, interface, and software requirements and we will confirm the matching configuration and lead time.

Open camera finder

Model selection

Nearby series comparison

Compare E3ISPM45000KPB with the closest available models in the E3ISPM family. Confirm option-dependent values on the final configuration before ordering.

Selection parameterE3ISPM45000KPB (current)E3ISPM45000KPAE3ISPM32000KPA
SensorIMX492 (C,RS)IMX294 (C)IMX294 (C)
Resolution45M (8176×5616)45M (8176×5616)32M (5600×5600)
Sensor size18.93 mm × 13.00 mm18.93 mm × 13.00 mm12.96 mm × 12.96 mm
Pixel size / frame rate2.315 µm × 2.315 µm2.315 µm × 2.315 µm2.315 µm × 2.315 µm

Other cameras on the IMX492 sensor

The IMX492 appears in 10 models across the catalogue, differing in cooling, shutter, interface and colour filter. Compare them side by side before settling on a variant.