Spectral dispersion
Groove density and focal geometry set dispersion, while the illuminated groove count and slit determine attainable resolution.
Representative Zolix product-family image; model appearance may vary by configuration.
Monochromators and SPE · gratings
4-060-300-NP
Grating | 40*40mm，600g/mm@300nm，200-600nm. 4-060-300-NP is a configurable diffraction grating in the gratings family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
Catalog context
Where 4-060-300-NP fits
4-060-300-NP is listed in the gratings family. Use the product-family page and any model-specific downloads available here to confirm the required configuration.
Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Engineering reference
Specify 4-060-300-NP from the interfaces inward
4-060-300-NP is a configurable diffraction grating in the gratings family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
A diffraction grating separates wavelengths through groove period and incidence geometry. Groove density, blaze, coated substrate, illuminated aperture and polarization determine efficiency and resolution in the actual spectrometer.
The local price-list record does not provide a complete model specification or datasheet. These fields identify what must be confirmed on the model drawing and quotation without inventing an option-dependent value.
Configuration fields to confirm
- Wavelength and order
- State operating band, diffraction order and required order-sorting strategy.
- Groove density
- Choose groove frequency against dispersion, focal length and detector sampling.
- Blaze and efficiency
- Specify blaze wavelength or angle and minimum efficiency for the required polarization.
- Size and substrate
- Confirm ruled area, thickness, substrate, flatness and mounting allowance.
- Coating and power
- Match coating, environment and laser-damage requirement to the source.
- Mounting geometry
- Provide incidence angle, orientation, holder datum and allowed wavefront error.
Qualification sequence
- 1Define the measurement objective and the performance limit that 4-060-300-NP must satisfy.
- 2Freeze wavelength, mechanical, fiber and electrical interfaces before selecting option codes.
- 3Check loss, noise, heat, motion or vibration contributions in the complete system budget.
- 4Confirm the final drawing, pinout, environmental suffix and acceptance test with the quotation.
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Laser wavelength selection
Blaze, coating and polarization determine feedback efficiency and power handling at the selected wavelength.
Technical FAQ
Integration questions for 4-060-300-NP
What must be specified before ordering 4-060-300-NP?
Confirm wavelength and order, groove density, blaze and efficiency, size and substrate, coating and power, and mounting geometry. These fields are coupled, so the final part number should be checked against the complete instrument rather than selected from the model name alone.
How should 4-060-300-NP be integrated into the system?
A diffraction grating separates wavelengths through groove period and incidence geometry. Groove density, blaze, coated substrate, illuminated aperture and polarization determine efficiency and resolution in the actual spectrometer. Freeze the optical, mechanical and electrical interfaces before releasing the surrounding assembly.
Which documentation should be approved for 4-060-300-NP?
Approve the configuration-specific specification, mechanical drawing, connector or pinout definition, environmental suffix and acceptance-test limits supplied with the quotation. Any field absent from the local record remains a confirmation item, not an assumed capability.
Model selection
Nearby series comparison
Compare 4-060-300-NP with the closest available models in the gratings family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | 4-060-300-NP (current) | 4-060-1000-NP | 4-060-500 |
|---|---|---|---|
| Wavelength | Confirm for this model | Confirm for this model | Confirm for this model |
| Size / aperture | Confirm for this model | Confirm for this model | Confirm for this model |
| Efficiency / transmission | Confirm for this model | Confirm for this model | Confirm for this model |
| Substrate / coating | Confirm for this model | Confirm for this model | Confirm for this model |
Related products
9-120-300
Grating | 50*50mm，1200g/mm@300nm，200-600nm. 9-120-300 is a configurable diffraction grating in the gratings family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
9-120-500
Grating | 50*50mm，1200g/mm@500nm，330-1000nm. 9-120-500 is a configurable diffraction grating in the gratings family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
9-060-500
Grating | 50*50mm，600g/mm@500nm，330-1000nm. 9-060-500 is a configurable diffraction grating in the gratings family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
9-060-750
Grating | 50*50mm，600g/mm@750nm，500-1500nm. 9-060-750 is a configurable diffraction grating in the gratings family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
