Fine angular and linear adjustment
Fine-pitch screws convert a comfortable knob rotation into a few microns of travel.
Adjustment Screws & Tools · ACFS series Adjustment Screw
ACFS25-1
ACFS series Adjustment Screw
ACFS series adjustment screw is the cost effective mechenics to adjust the position without reading scales.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where ACFS25-1 fits
ACFS25-1 is listed as ACFS series Adjustment Screw in the ACFS series Adjustment Screw family. The local catalog record provides these first selection fields: Model: ACFS25-1; Translation Range(mm): 25; Adjustment Screw Thread: M6x0.25.
Specifications
| Model | ACFS25-1 |
|---|---|
| Translation Range(mm) | 25 |
| Adjustment Screw Thread | M6x0.25 |
| Screw Pitch(mm) | 0.25 |
| Mounting Diameter(mm) | Ø9.5 |
| Mounting Length(mm) | 10 |
| Overall Length A(mm) | 61 |
| Screw Rod Length B(mm) | 41 |
| Thumb Wheel Diameter(mm) | Ø13 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Upgrading existing mounts
Raise the resolution of a mount already in service by changing only its adjusters.
Locking a found position
Radial locking holds the setting once alignment is complete, through handling and thermal cycling.
System integration
Integration and compatibility
Use these checks to connect ACFS25-1 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Mounting interface
- Adjustment Screw Thread: M6x0.25
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Adjustment
- Screw Pitch(mm): 0.25
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
Technical FAQ
Integration questions for ACFS25-1
How does the ACFS25-1 mount?
Adjustment Screw Thread: M6x0.25. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What adjustment range does the ACFS25-1 offer?
Screw Pitch(mm): 0.25. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
Model selection
Nearby series comparison
Compare ACFS25-1 with the closest available models in the ACFS series Adjustment Screw family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | ACFS25-1 (current) | ACFS13-2S | ACFS25-1S |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | M6x0.25 | M6x0.25 | Confirm for this model |
| Mounting interface | Ø9.5 | Ø9.5 | Confirm for this model |
| Material | Confirm for this model | Confirm for this model | Confirm for this model |
