Fine angular and linear adjustment
Fine-pitch screws convert a comfortable knob rotation into a few microns of travel.
Adjustment Screws & Tools · ACFS series Adjustment Screw
ACSF-N100-0.35
ACFS series Adjustment Screw
ACFS series adjustment screw is the cost effective mechenics to adjust the position without reading scales.
Datasheet (PDF) ↗CAD Model (ZIP) ↗Catalog context
Where ACSF-N100-0.35 fits
ACSF-N100-0.35 is listed as ACFS series Adjustment Screw in the ACFS series Adjustment Screw family. The local catalog record provides these first selection fields: Model: ACSF-N100-0.35; Translation Range(mm): 10; Adjustment ScrewThread: M7x0.25.
Specifications
| Model | ACSF-N100-0.35 |
|---|---|
| Translation Range(mm) | 10 |
| Adjustment ScrewThread | M7x0.25 |
| Screw Pitch(mm) | 0.25 |
| Mounting Diameter(mm) | Ø9.5 |
| Mounting Length(mm) | 9.5~13 |
| Overall Length(mm) | 50 |
| Screw Rod Length(withball)(mm) | 32 |
| Thumb Wheel Diameter(mm) | Ø16 |
| Locking | Radial locking |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Upgrading existing mounts
Raise the resolution of a mount already in service by changing only its adjusters.
Locking a found position
Radial locking holds the setting once alignment is complete, through handling and thermal cycling.
System integration
Integration and compatibility
Use these checks to connect ACSF-N100-0.35 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Mounting interface
- Adjustment ScrewThread: M7x0.25
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Adjustment
- Screw Pitch(mm): 0.25
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
Technical FAQ
Integration questions for ACSF-N100-0.35
How does the ACSF-N100-0.35 mount?
Adjustment ScrewThread: M7x0.25. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What adjustment range does the ACSF-N100-0.35 offer?
Screw Pitch(mm): 0.25. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
Model selection
Nearby series comparison
Compare ACSF-N100-0.35 with the closest available models in the ACFS series Adjustment Screw family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | ACSF-N100-0.35 (current) | ACFS25-2S | ACSF-N100-0.5 |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | M7x0.25 | Confirm for this model | M7x0.25 |
| Mounting interface | Ø9.5 | Confirm for this model | Ø9.5 |
| Material | Confirm for this model | Confirm for this model | Confirm for this model |
