Automated optical alignment
Repeatability, stiffness and axis geometry determine whether an optimized optical path can be recovered after each move.
Representative Zolix product-family image; model appearance may vary by configuration.
Opto-Mechanics · Manual Stages
ASK13-40CCZ
Manual Stage. ASK13-40CCZ is a configurable precision positioning mechanism in the Manual Stages family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
Catalog context
Where ASK13-40CCZ fits
ASK13-40CCZ is listed in the Manual Stages family. Use the product-family page and any model-specific downloads available here to confirm the required configuration.
Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Engineering reference
Specify ASK13-40CCZ from the interfaces inward
ASK13-40CCZ is a configurable precision positioning mechanism in the Manual Stages family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
A positioning mechanism converts drive motion into a constrained degree of freedom. Travel and nominal resolution are insufficient on their own: load, stiffness, backlash, repeatability, straightness, encoder placement and controller architecture determine positioning at the payload.
The local price-list record does not provide a complete model specification or datasheet. These fields identify what must be confirmed on the model drawing and quotation without inventing an option-dependent value.
Configuration fields to confirm
- Motion envelope
- State travel or angular range, usable aperture and collision-clearance requirements.
- Payload
- Provide mass, center of gravity, applied moment and orientation.
- Accuracy performance
- Define resolution, minimum incremental motion, repeatability, accuracy and allowable runout.
- Speed and duty cycle
- Specify velocity, acceleration, settling time and expected move profile.
- Mounting datums
- Confirm footprint, thread standard, axis height and payload interface.
- Controller and environment
- Match motor, encoder and limit wiring; state vacuum, cryogenic or cleanroom requirements.
Qualification sequence
- 1Define the measurement objective and the performance limit that ASK13-40CCZ must satisfy.
- 2Freeze wavelength, mechanical, fiber and electrical interfaces before selecting option codes.
- 3Check loss, noise, heat, motion or vibration contributions in the complete system budget.
- 4Confirm the final drawing, pinout, environmental suffix and acceptance test with the quotation.
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Scanning measurement
Incremental motion, settling time and encoder location set spatial sampling and throughput at the actual payload.
Technical FAQ
Integration questions for ASK13-40CCZ
What must be specified before ordering ASK13-40CCZ?
Confirm motion envelope, payload, accuracy performance, speed and duty cycle, mounting datums, and controller and environment. These fields are coupled, so the final part number should be checked against the complete instrument rather than selected from the model name alone.
How should ASK13-40CCZ be integrated into the system?
A positioning mechanism converts drive motion into a constrained degree of freedom. Travel and nominal resolution are insufficient on their own: load, stiffness, backlash, repeatability, straightness, encoder placement and controller architecture determine positioning at the payload. Freeze the optical, mechanical and electrical interfaces before releasing the surrounding assembly.
Which documentation should be approved for ASK13-40CCZ?
Approve the configuration-specific specification, mechanical drawing, connector or pinout definition, environmental suffix and acceptance-test limits supplied with the quotation. Any field absent from the local record remains a confirmation item, not an assumed capability.
Model selection
Nearby series comparison
Compare ASK13-40CCZ with the closest available models in the Manual Stages family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | ASK13-40CCZ (current) | ASK13-40CC-L | ASK13-40CCZ-L |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | Confirm for this model | Confirm for this model | Confirm for this model |
| Mounting interface | Confirm for this model | Confirm for this model | Confirm for this model |
| Material | Confirm for this model | Confirm for this model | Confirm for this model |
Related products
NFPG-1461U
Manual Goniometers. NFPG-1461U is a configurable precision positioning mechanism in the Manual Stages family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
NFPG-1461D
Manual Goniometers. NFPG-1461D is a configurable precision positioning mechanism in the Manual Stages family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
NFPG-1462U
Manual Goniometers. NFPG-1462U is a configurable precision positioning mechanism in the Manual Stages family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
NFPG-1462D
Manual Goniometers. NFPG-1462D is a configurable precision positioning mechanism in the Manual Stages family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
