Set-and-forget alignment
Adjust once during setup and lock, on axes that do not need to move again during the run.
Opto-Mechanics · NFP Series Crossed-Roller Bearing High Precision Linear Stages
NFP-1462CZ
Manual Stage
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where NFP-1462CZ fits
NFP-1462CZ is listed in the NFP Series Crossed-Roller Bearing High Precision Linear Stages family. The local catalog record provides these first selection fields: Travel range(mm): 13; Stage surface size(mm): 40×40; Thickness(mm): 19.5.
Specifications
| Travel range(mm) | 13 |
|---|---|
| Stage surface size(mm) | 40×40 |
| Thickness(mm) | 19.5 |
| Guide mechanism | Precise crossed-roller guide |
| Drive type | Micrometer |
| Drive location | Center |
| Main body material and surface treatment | Stainless steel, sandblasting |
| Sensitivity(µm) | ≤1 |
| Minimum reading of mi-crometer(mm) | 0.01 |
| Straightness(um) | ≤3 |
| Load capacity(Kg) | 5 |
| Weight(Kg) | 0.28 |
| Axes of Travel | X |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Coarse positioning ahead of fine stages
Establish the optical axis by hand before a piezo or motorised stage takes the fine motion.
Prototyping and teaching rigs
Reconfigure a layout quickly, with no cabling, controllers or electrical noise added to the experiment.
System integration
Integration and compatibility
Use these checks to connect NFP-1462CZ to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Adjustment
- Travel range(mm): 13 · Sensitivity(µm): ≤1
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
- Material and finish
- Stage surface size(mm): 40×40 · Main body material and surface treatment: Stainless steel, sandblasting
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
- Dimensions and mass
- Load capacity(Kg): 5 · Weight(Kg): 0.28
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for NFP-1462CZ
What adjustment range does the NFP-1462CZ offer?
Travel range(mm): 13 · Sensitivity(µm): ≤1. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
What is the NFP-1462CZ made from?
Stage surface size(mm): 40×40 · Main body material and surface treatment: Stainless steel, sandblasting. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
What are the dimensions of the NFP-1462CZ?
Load capacity(Kg): 5 · Weight(Kg): 0.28. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare NFP-1462CZ with the closest available models in the NFP Series Crossed-Roller Bearing High Precision Linear Stages family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | NFP-1462CZ (current) | NFP-1462C | NFP-1462SL |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | 13 | 25 | 25 |
| Mounting interface | Confirm for this model | Confirm for this model | Confirm for this model |
| Material | 40×40 | 65×65 | 65×65 |
