Automated scanning and mapping
Step-and-acquire across areas far wider than a single field of view.
Opto-Mechanics · CXP and CXPF Series High-Precise Motorized Linear Stages
CXP15-40
CXP high-stiffness crossed-roller motorized linear stage; 15 mm travel; 40 mm platform width class; high moment stiffness; repeatability around +/-0.5 um.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where CXP15-40 fits
CXP15-40 is listed in the CXP and CXPF Series High-Precise Motorized Linear Stages family. The local catalog record provides these first selection fields: Travel range(mm): 15; Stage surface size(mm): 40×40; Guide mechanism: ball screw,φ6×1.
Specifications
| Travel range(mm) | 15 |
|---|---|
| Stage surface size(mm) | 40×40 |
| Guide mechanism | ball screw,φ6×1 |
| Guide mechanism | crossed-roller bearing guides |
| Main body material and surface treatments | Black anodized aluminum-alloy |
| Weight(Kg) | 0.4 |
| Shaft coupling (OD - OD1- OD2)(mm) | 16-3-5 |
| Resolution (step/half-step) (µm) | 5/2.5 |
| 20-fine-subdivision resolution (µm) | 0.25 |
| Max speed(mm/s)* | 10 |
| Repositioning accuracy (µm) | ≤±1.5 |
| Backlash(um) | ≤3 |
| Static parallelism (mm) | ≤0.08 |
| Motion straightness(µm) | ≤10 |
| Motion parallelism (µm) | ≤15 |
| Minimum incremental motion (µm)** | ≤5 |
| Brand and model number of motor | Shinano, STP-28D1003-08 |
| Motor and its stepping angle (°) | 2 phase 28 stepping motor, 1.8 |
| Insulation resistance | Above 100MΩ/Min |
| Insulating strength | "500V AC no abnormality within 1 minute" |
| Insulating level | UL B level |
| Weight(Kg) | 0.11 |
| Voltage(V) | 1.9 |
| Current | 1.3A/phase |
| Resistance | 1.45±10%Q/phase |
| Inductance | 1.25mH/phase |
| Holding torque | 0.0785N.m |
| Retarding torque | 0.00294N.m(reference value) |
| Inertia of the rotor | 8g.cm |
| Operating temperature | 0~+50℃ |
| Max operating temperature for motor | 80℃ Max |
| Brand and model number of stepping driver (optional) | Moons, SR2 |
| Type of plug for stage | DB9(pin) |
| Type of cable for stage | High flexibility cable (Helukabel, Germany) |
| Length of cables for stages(m) | 0.2 |
| Position-limit sensors (built-in) | 2*GP1S09xHCP(Japan SHARP) |
| Origin-point sensors (built- in) | 1*GP1S09xHCPI(Japan SHARP) |
| Voltage of power supply for sensors (V) | DC5-24V±10% |
| current consumption | <60 (total) |
| Control output | NPN open collector output DC5～24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Status of output ports | output ON when sensor is blocked |
| Horizontal direction(kg) | 5 |
| Vertical direction(kg) | 2 |
| Inverted direction(kg) | 3 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Repeatable production indexing
Move parts between fixed stations with closed-loop encoders holding position over long shifts.
Programmable multi-axis motion
Coordinate several axes from software for processing, inspection and test sequences.
System integration
Integration and compatibility
Use these checks to connect CXP15-40 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Travel and resolution
- Travel range(mm): 15 · Resolution (step/half-step) (µm): 5/2.5
- Separate travel from resolution and both from repeatability. Repeatability is what an automated sequence actually depends on, and it is the figure most often absent from a headline specification.
- Drive and feedback
- Brand and model number of motor: Shinano, STP-28D1003-08 · Motor and its stepping angle (°): 2 phase 28 stepping motor, 1.8
- Pair open-loop mechanics with the specified high-voltage or inertial driver, and closed-loop variants with the controller their capacitive, strain-gauge or encoder feedback requires. Matching connectors do not guarantee electrical compatibility.
- Vacuum and cryogenic rating
- Operating temperature: 0~+50℃ · Max operating temperature for motor: 80℃ Max
- Use only the environmental suffix listed for the ordered configuration, and treat cabling, lubricant, bakeout and thermal anchoring as part of the same specification.
Technical FAQ
Integration questions for CXP15-40
What travel and resolution does the CXP15-40 provide?
Travel range(mm): 15 · Resolution (step/half-step) (µm): 5/2.5. Separate travel from resolution and both from repeatability. Repeatability is what an automated sequence actually depends on, and it is the figure most often absent from a headline specification.
Which controller does the CXP15-40 require?
Brand and model number of motor: Shinano, STP-28D1003-08 · Motor and its stepping angle (°): 2 phase 28 stepping motor, 1.8. Pair open-loop mechanics with the specified high-voltage or inertial driver, and closed-loop variants with the controller their capacitive, strain-gauge or encoder feedback requires. Matching connectors do not guarantee electrical compatibility.
Is the CXP15-40 rated for vacuum or cryogenic use?
Operating temperature: 0~+50℃ · Max operating temperature for motor: 80℃ Max. Use only the environmental suffix listed for the ordered configuration, and treat cabling, lubricant, bakeout and thermal anchoring as part of the same specification.
Model selection
Nearby series comparison
Compare CXP15-40 with the closest available models in the CXP and CXPF Series High-Precise Motorized Linear Stages family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | CXP15-40 (current) | CXP15-40-ST528 | CXP20-60 |
|---|---|---|---|
| Travel / adjustment | 15 | Confirm for this model | 20 |
| Resolution / sensitivity | 5/2.5 | Confirm for this model | 5/2.5 |
| Load / optic size | Confirm for this model | Confirm for this model | Confirm for this model |
| Mounting interface | Confirm for this model | Confirm for this model | Confirm for this model |
Related products
CXP20-60
CXP high-stiffness crossed-roller motorized linear stage; 20 mm travel; 60 mm platform width class; high moment stiffness; repeatability around +/-0.5 um.
CXPF30-80
CXPF flanged crossed-roller motorized linear stage; 30 mm travel; 80 mm platform width class; high stiffness for larger payloads and moment loads.
CXPF50-80100
CXPF flanged crossed-roller motorized linear stage; 50 mm travel; 80 mm x 100 mm platform class; high stiffness for larger payloads and moment loads.
CXPF75-80125
CXPF flanged crossed-roller motorized linear stage; 75 mm travel; 80 mm x 125 mm platform class; high stiffness for larger payloads and moment loads.
