Isolators & Circulators
The OISM Series optical isolator is a passive device that passes light in the normal direction while blocking light in the reverse direction for any state of polarization. Employing our advanced all glass micro optics design, it features ultra-low insertion loss, high power handling, high isolation, ultra-mini structure, and high stability. The device is RoHS compliant and Telcordia qualified, making it an ideal choice for applications in fiber amplifiers, pump lasers, and optical fiber sensors.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: OISM
Stages: Dual · Wavelength: 1310nm · Power Level: 10W · Fiber Type: SMF-28 · Cable Type: Bare Fiber · Fiber Length: 0.25m
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Mini Fiber Optical Isolator 10W 1310/1550nm: Laser source protection depends on preserving the optical budget through the complete path. The 1310nm, C Band, L Band, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, Special) must match the connected components.
Mini Fiber Optical Isolator 10W 1310/1550nm: Bidirectional signal routing depends on preserving the optical budget through the complete path. The 1310nm, C Band, L Band, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, Special) must match the connected components.
System integration
Use these checks to connect Mini Fiber Optical Isolator 10W 1310/1550nm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SMF-28, Special · Fiber Length: 0.25m, 0.5m, 1.0m, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1310nm, C Band, L Band, Special. Check the Isolators & Circulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Mini Fiber Optical Isolator 10W 1310/1550nm with the closest available models in the Isolators & Circulators family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Mini Fiber Optical Isolator 10W 1310/1550nm (current) | Mini 1060nm Fiber Optical Isolator | MM Fiber Optical Circulator 1310nm & 1550nm |
|---|---|---|---|
| Wavelength range | 1310nm, C Band, L Band, Special | 1060 | 1310, 1550, 1590, C+L, Special |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SMF-28, Special | HI1060, HI1060 Flex, 50/125, 62.5/125 | GIF 50/125 μm, F |
| Connector / control | Confirm for this model | None, FC/APC, Special | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, Special |
