Isolators & Circulators
High Power Fiber Optical Circulator 1310nm & 1550nm
The 1310/1550 nm high power optical circulator is designed for high power applications. This non-reciprocal device redirects light at 1310/1550 nm wavelengths from port-to-port in only one direction while minimizing back reflection and back scattering in the reverse directions for any state of polarization. Employing our advanced micro optics design, it features low insertion loss, low polarization sensitivity, high isolation, compact structure, and high stability. The excellent characteristics of this product make it an ideal choice for application in fiber amplifier systems, pump laser diodes, and optical fiber sensors. This circulator can be made using a variety of fibers including HI980, HI1060, LMA, and double cladding fibers.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Type: 3 Port · Wavelength: 1310 · Package: 5.5 x 50 · Fiber Type: SMF-28 · Fiber Cover: Bare fiber · Fiber Length: 0.25m · Connector: None
System integration
Integration and compatibility
Use these checks to connect High Power Fiber Optical Circulator 1310nm & 1550nm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, PM1550 · Fiber Cover: Bare fiber, 900um loose tube, 250um, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1310, 1550, C-band, L-band, C+L, Special
- Check the Isolators & Circulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for High Power Fiber Optical Circulator 1310nm & 1550nm
Which fiber and connector does the High Power Fiber Optical Circulator 1310nm & 1550nm use?
Fiber Type: SMF-28, PM1550 · Fiber Cover: Bare fiber, 900um loose tube, 250um, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the High Power Fiber Optical Circulator 1310nm & 1550nm be included in an optical power budget?
Wavelength: 1310, 1550, C-band, L-band, C+L, Special. Check the Isolators & Circulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare High Power Fiber Optical Circulator 1310nm & 1550nm with the closest available models in the Isolators & Circulators family.
| Selection parameter | High Power Fiber Optical Circulator 1310nm & 1550nm (current) | Mini 1060nm Fiber Optical Isolator |
|---|---|---|
| Wavelength range | 1310, 1550, C-band, L-band, C+L, Special | 1060 |
| Fiber type | SMF-28, PM1550 | HI1060, HI1060 Flex, 50/125, 62.5/125 |
| Connector / control | None, FC/PC, FC/APC, Special | None, FC/APC, Special |
