Isolators & Circulators
The OC Series 1310/1550 optical circulators are non-reciprocal devices that redirect light from port-to-port in one direction while minimizing reflection and scattering in the reverse directions for any state of polarization. Our advanced micro optics design features low insertion loss, low polarization sensitivity, high isolation, compact structure, and high stability. The excellent characteristics of this product make it an ideal choice for application in fiber amplifier systems, pump laser diodes, and optical fiber sensors.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Type: 3 Port · Wavelength: 1310 · Package: Standard · Fiber Type: GIF 50/125 μm · Fiber Cover: 250um bare fiber · Fiber Length: 0.5m · Connector: None
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
MM Fiber Optical Circulator 1310nm & 1550nm: Laser source protection depends on preserving the optical budget through the complete path. The 1310, 1550, 1590, C+L, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (GIF 50/125 μm, F) must match the connected components.
MM Fiber Optical Circulator 1310nm & 1550nm: Bidirectional signal routing depends on preserving the optical budget through the complete path. The 1310, 1550, 1590, C+L, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (GIF 50/125 μm, F) must match the connected components.
System integration
Use these checks to connect MM Fiber Optical Circulator 1310nm & 1550nm to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: GIF 50/125 μm, F · Fiber Cover: 250um bare fiber, 900um loose tube, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1310, 1550, 1590, C+L, Special. Check the Isolators & Circulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare MM Fiber Optical Circulator 1310nm & 1550nm with the closest available models in the Isolators & Circulators family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MM Fiber Optical Circulator 1310nm & 1550nm (current) | Mini Fiber Optical Isolator 10W 1310/1550nm | PM Fiber Optical Circulator 1310nm & 1550nm |
|---|---|---|---|
| Wavelength range | 1310, 1550, 1590, C+L, Special | 1310nm, C Band, L Band, Special | 1310, 1550, C band, L Band, C+L |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | GIF 50/125 μm, F | SMF-28, Special | PM1550, PM980, Panda 80 |
| Connector / control | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, Special | Confirm for this model | None, FC/PC, FC/APC, Special |
