Optical Switches
The NS Premium Series fiber optic switch uniquely features low optical loss, fast response, high on-off extinction of 30dB, little drift, and high optical power handling. This is achieved using patented electro-optical configuration of clean fast response without ripples and temperature compensation in combination with compensating electro-optical control technology that significantly reduces drift to achieve a high on/off ratio at high speed. The switch is intrinsically bidirectional and selectable for polarization-independent or polarization-maintain by the fiber type. The NSP fiber optic switch is designed to meet the most demanding switching requirements of continuous operations over 25 years. The non-mechanical design provides ultra-high reliability and vibration insensitivity.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Type: 1x1 Transparent · Wavelength: 1060 · Power: 0.3W · Repetition Rate: 50kHz · Fiber Type: SMF-28 · Fiber Cover: 900um tube · Fiber Length: 1.0 m · Connector: None · PER: None · Benchtop: None
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Premium High Speed 1×1, 1×2, 2×2 Fiber Optical Switch: Dual Stage, 50ns, 30dB On/Off, 50kHz: Optical signal routing depends on preserving the optical budget through the complete path. The 1060, 1310, 1550, 1625, 1750, 850 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, HI1060, HI780, PM1550, PM980, MM50/125) must match the connected components.
Premium High Speed 1×1, 1×2, 2×2 Fiber Optical Switch: Dual Stage, 50ns, 30dB On/Off, 50kHz: Automated fiber test depends on preserving the optical budget through the complete path. The 1060, 1310, 1550, 1625, 1750, 850 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, HI1060, HI780, PM1550, PM980, MM50/125) must match the connected components.
Downloads
System integration
Use these checks to connect Premium High Speed 1×1, 1×2, 2×2 Fiber Optical Switch: Dual Stage, 50ns, 30dB On/Off, 50kHz to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SMF-28, HI1060, HI780, PM1550, PM980, MM50/125 · Fiber Cover: 900um tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1060, 1310, 1550, 1625, 1750, 850. Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Premium High Speed 1×1, 1×2, 2×2 Fiber Optical Switch: Dual Stage, 50ns, 30dB On/Off, 50kHz with the closest available models in the Optical Switches family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Premium High Speed 1×1, 1×2, 2×2 Fiber Optical Switch: Dual Stage, 50ns, 30dB On/Off, 50kHz (current) | Power Supply SDC 5 500 | Premium High Speed 1×1, 1×2, 2×2 Fiber Optical Switch: Single Stage, 50ns, 18dB On/Off, 800kHz |
|---|---|---|---|
| Wavelength range | 1060, 1310, 1550, 1625, 1750, 850 | Confirm for this model | 1060, 2000, 1310, 1550, 1625, 1750, 850, 780, 650, 550, 450 |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SMF-28, HI1060, HI780, PM1550, PM980, MM50/125 | Confirm for this model | SMF-28, HI1060, HI780, PM1550, SM600, SM800, PM850, PM780, PM630, PM980, MM50/125, SM400, SM450, Hi980, SM1950, PM405, PM460, PM1950 |
| Connector / control | None, FC/APC, Special | 2.1/5.5 mm Phono Plug | None, 200kHz, 500kHz, 800kHz |
