Use these checks to connect Premium High Speed 1×1, 1×2, 2×2 Fiber Optical Switch: Single Stage, 50ns, 18dB On/Off, 800kHz to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, HI1060, HI780, PM1550, SM600, SM800, PM850, PM780, PM630, PM980, MM50/125, SM400, SM450, Hi980, SM1950, PM405, PM460, PM1950 · Fiber Cover: Bare fiber, 900um tube, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1060, 2000, 1310, 1550, 1625, 1750, 850, 780, 650, 550, 450
- Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
- Control interface
- Driver: None, 200kHz, 500kHz, 800kHz
- Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
