Optical Switches

Power Supply SDC 5 500

Power Supply 5VDC, 0.5A. Switches, Attenuators, Lasers, Modulators

Configure & add to enquiry Datasheet (PDF)Back to Optical Switches

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

Output VoltageOutput CurrentConnector Type

Part number: SDC-050511111

Output Voltage: 5VDC · Output Current: 0.5A · Connector Type: 2.1/5.5 mm Phono Plug

Downloads

Datasheets & documents

Power Supply SDC 5 500

System integration

Integration and compatibility

Use these checks to connect Power Supply SDC 5 500 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Connector Type: 2.1/5.5 mm Phono Plug; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Control interface: Output Voltage: 5VDC; Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.

Technical FAQ

Integration questions for Power Supply SDC 5 500

Which fiber and connector does the Power Supply SDC 5 500 use?

Connector Type: 2.1/5.5 mm Phono Plug. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

Does the Power Supply SDC 5 500 require a controller?

Output Voltage: 5VDC. Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.