Optical Switches

Power Supply SDC 12 1000

Power Supply 12VDC, 1A. Switches, Attenuators, Lasers, Modulators

Configure & add to enquiry Datasheet (PDF)Back to Optical Switches

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

Output VoltageOutput CurrentConnector Type

Part number: SDC-121011111

Output Voltage: 12VDC · Output Current: 1A · Connector Type: 2.1/5.5 mm Phono Plug

Downloads

Datasheets & documents

Power Supply SDC 12 1000

System integration

Integration and compatibility

Use these checks to connect Power Supply SDC 12 1000 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Connector Type: 2.1/5.5 mm Phono Plug; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Control interface: Output Voltage: 12VDC; Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.

Technical FAQ

Integration questions for Power Supply SDC 12 1000

Which fiber and connector does the Power Supply SDC 12 1000 use?

Connector Type: 2.1/5.5 mm Phono Plug. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

Does the Power Supply SDC 12 1000 require a controller?

Output Voltage: 12VDC. Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.