High Speed Variable Optical Delay - Piezo Driven
The PZTD Series High-Speed Variable Optical Time Delay delivers exceptional performance with high speed and low loss.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Type: Mini · PER: Non · Wavelength: 488 · Max Delay: 7 µm · Optical Power: 0.5W · Fiber Type: SMF-28 · Fiber Cover: 0.9mm Tube · Connector: FC/PC
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
High Speed Variable Optical Delay – Piezo Driven: Laboratory optical integration depends on preserving the optical budget through the complete path. The 488, 532, 650, 780, 850, 980, 1060, 1310, 1550, 2000 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, Hi1060, PM1550, 780HP) must match the connected components.
High Speed Variable Optical Delay – Piezo Driven: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 488, 532, 650, 780, 850, 980, 1060, 1310, 1550, 2000 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, Hi1060, PM1550, 780HP) must match the connected components.
System integration
Use these checks to connect High Speed Variable Optical Delay – Piezo Driven to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SMF-28, Hi1060, PM1550, 780HP · Fiber Cover: 0.9mm Tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 488, 532, 650, 780, 850, 980, 1060, 1310, 1550, 2000. Check the High Speed Variable Optical Delay - Piezo Driven passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.