Optical / RF Delay Lines
The RFOF is designed to form an RF link between two points using fiber optical cables. It features immunity to interferences, high bandwidth, low signal loss over long distances, low signal distortion, low power consumption, high reliability, and is easy to implement. It converts an input RF electrical signal into an optical signal via an electro-optical modulator coupled with a DFB laser (transmitter) and re-converts the optical signal back into the RF signal at the other end of the fiber link via a high linearity photodiode integrated with low noise amplifier (receiver). The transmitter and receiver pair form a transceiver that provides a transparent data transmission channel. They are available in wavelengths 1550nm C-band, providing a versatile wavelength division multiplexing (WDM) capability.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: RFOF-35G11112
RF Frequency: 35GHz SM · Wavelength: 1550 nm · TX/RX: Receiver · Package: Module · Bidirectional: None · Fiber Connector: FC/APC
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber Optical Transmitter/Receiver 10MHz to 35GHz: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1550 nm, 1560 nm wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/APC, Special) must match the connected components.
Fiber Optical Transmitter/Receiver 10MHz to 35GHz: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1550 nm, 1560 nm wavelength specification sets source and detector compatibility. The fiber/interface entry (FC/APC, Special) must match the connected components.
System integration
Use these checks to connect Fiber Optical Transmitter/Receiver 10MHz to 35GHz to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Connector: FC/APC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1550 nm, 1560 nm. Check the Optical / RF Delay Lines passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Fiber Optical Transmitter/Receiver 10MHz to 35GHz with the closest available models in the Optical / RF Delay Lines family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Fiber Optical Transmitter/Receiver 10MHz to 35GHz (current) | Fiber Optical Transmitter/Receiver 10MHz to 12GHz | Transmitter/Receiver RF over Fiber Low Noise High SFDR – DC-50GHz |
|---|---|---|---|
| Wavelength range | 1550 nm, 1560 nm | 1550 nm | 1550 nm, ITU Tunable, 1310 nm, WDM ITU |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | SM28, PM1550 |
| Connector / control | FC/APC, Special | FC/APC, Special | FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, Special |
