Back to Home
Precisometer

Connectors & Cables

High Power Multimode Fiber Optic Connector

Our high-power connectors incorporate several advantageous features. We use copper ferrules with a bored front to dissipate heat better and free-standing fiber tips to minimize the probability of damage to uncoupled light. The front part of the connector is epoxy-free to prevent burning. It has a key pin so that each connector can be pre-aligned to achieve and ensure uniform low loss. AR coating is an option to further reduce the loss and increase reliability. Moreover, we offer mode-stripping which removes most of the light from fiber cladding. We further offer fiber end-cap enhancement of these connectors for higher power handling, which expands the Mode Field Diameter and thus reduces the power density at the glass-air interface to a level below the damage threshold.

Configure & add to enquiry Datasheet (PDF)Back to Connectors & Cables
High Power Multimode Fiber Optic Connector

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

Part number: HPCT-010001111

Type: SMA905 · Wavelength AR Coating: None · End Cap: No · Heat Sink: No · Fiber Type: Step Index · Cable Type: PVC · Fiber: 105/125 · Connector: One End

Downloads

Datasheets & documents

System integration

Integration and compatibility

Use these checks to connect High Power Multimode Fiber Optic Connector to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber
Fiber Type: Step Index, Graded Index · Fiber: 105/125, 100/600, 200/220, 200/280, 400/440, 400/480, 600/720, 800/880, 1000/1100
Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength and loss budget
Wavelength AR Coating: None, 488, 532, 650, 780, 850, 980, 1060, 1310, 1550, 2000
Check the Connectors & Cables passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Technical FAQ

Integration questions for High Power Multimode Fiber Optic Connector

Which fiber and connector does the High Power Multimode Fiber Optic Connector use?

Fiber Type: Step Index, Graded Index · Fiber: 105/125, 100/600, 200/220, 200/280, 400/440, 400/480, 600/720, 800/880, 1000/1100. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

How should the High Power Multimode Fiber Optic Connector be included in an optical power budget?

Wavelength AR Coating: None, 488, 532, 650, 780, 850, 980, 1060, 1310, 1550, 2000. Check the Connectors & Cables passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Need this configured?

Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.

Configure & add to enquiry

Model selection

Nearby series comparison

Compare High Power Multimode Fiber Optic Connector with the closest available models in the Connectors & Cables family.

Selection parameterHigh Power Multimode Fiber Optic Connector (current)High Power Single Mode Fiber Optic Patch Cable/Connector 10W
Wavelength rangeNone, 488, 532, 650, 780, 850, 980, 1060, 1310, 1550, 2000480, 630, 780, 850, 980, 1060, 1310, 1400, 1550, Special
Fiber typeStep Index, Graded IndexRGB400, PM480, PM630, HI 780, PM980, HI1060, SMF28, 50/125, 62.5/125, Special
Connector / controlOne End, Both EndFC/PC, FC/APC, Special

Related connectors & cables