Connectors & Cables
Polarization-Maintaining Fiber Optical Patch Cable - PM460
These polarization-maintaining fiber optic patch cables are terminated on both ends with high-quality, narrow key, ceramic FC/PC connectors, featuring high-quality polish with a typical return loss of 50 dB. Each cable is individually tested to ensure the specified extinction ratio and insertion loss at fiber-to-fiber junctions. Each patch cable includes two protective caps that shield the ferrule ends from dust and other hazards. Each cable comes with a mating connector adaptor for ease of use.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: FCPM-4A11R14111
Wavelength: 460nm · Fiber Length: 1m · PER: 18dB · Power: Regular · Key Aligned: Slow Axis · Fiber Type: PM460 · Fiber Cover: 0.9mm · Connector2: FC/PC · Connector1: FC/PC
System integration
Integration and compatibility
Use these checks to connect Polarization-Maintaining Fiber Optical Patch Cable - PM460 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Length: 1m, 5m, 12m · Fiber Type: PM460
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 460nm
- Check the Connectors & Cables passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Polarization-Maintaining Fiber Optical Patch Cable - PM460
Which fiber and connector does the Polarization-Maintaining Fiber Optical Patch Cable - PM460 use?
Fiber Length: 1m, 5m, 12m · Fiber Type: PM460. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Polarization-Maintaining Fiber Optical Patch Cable - PM460 be included in an optical power budget?
Wavelength: 460nm. Check the Connectors & Cables passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Polarization-Maintaining Fiber Optical Patch Cable - PM460 with the closest available models in the Connectors & Cables family.
| Selection parameter | Polarization-Maintaining Fiber Optical Patch Cable - PM460 (current) | Polarization-Maintaining Fiber Optical Patch Cable - PM405 | Polarization-Maintaining Fiber Optical Patch Cable - PM630 |
|---|---|---|---|
| Wavelength range | 460nm | 405nm | 630nm |
| Fiber type | PM460 | PM405 | PM630 |
| Connector / control | FC/PC, FC/APC, Special | FC/PC, FC/APC, Special | FC/PC, FC/APC, Special |
Related connectors & cables
- Polarization-Maintaining Fiber Optical Patch Cable - PM405
- Polarization-Maintaining Fiber Optical Patch Cable - PM630
- Polarization-Maintaining Fiber Optical Patch Cable - PM780
- Polarization-Maintaining Fiber Optical Patch Cable - PM850
- Polarization-Maintaining Fiber Optical Patch Cable - PM980
- Polarization-Maintaining Fiber Optical Patch Cable - PM1310