Back to Home

Isolators & Circulators

Fiber Optical Isolator 400–780 nm (OIUW)

  • Center wavelength: Discrete nominal wavelengths from 400 to 780 nm, with an 800 nm ordering option
  • Isolation: 22 dB minimum, 27 dB typical (single-stage); 45 dB minimum, 50 dB typical (dual-stage)
  • Insertion loss: 1 dB typical, 3.5 dB maximum, excluding connectors and dependent on fiber core size
  • Input power: 20 mW maximum below 650 nm for standard builds. Confirm the limit for the selected fiber and connector.
  • Custom builds: Up to 5 W CW where available. Specify input power when requesting a quotation.
Fiber Optical Isolator 400–780 nm (OIUW)

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

We confirm the exact part number for your configuration on enquiry.

Center wavelength: 400 nm · Isolation stage: Single-stage · Polarization: Polarization-independent · Fiber type: SM400 · Output monitoring tap: None · Fiber cover: 0.9 mm buffer tube · Fiber length: 0.25 m · Connector: None

Specifications

Fiber Optical Isolator 400–780 nm (OIUW)

Center wavelength400–800 nm across discrete configurations
Operating bandwidth±40 nm typical about the selected center wavelength
Isolation22 dB minimum, 27 dB typical (single-stage); 45 dB minimum, 50 dB typical (dual-stage)
Insertion loss1 dB typical, 3.5 dB maximum. Excludes connectors and depends on fiber core size.
Wavelength-dependent loss0.2 dB maximum
Polarization-dependent loss (SM)0.1 dB typical, 0.2 dB maximum
Polarization extinction ratio (PM)18 dB minimum. Higher extinction is available by special order.
Polarization-mode dispersion0.2 ps maximum
Return loss50 dB minimum
Optical input power20 mW maximum below 650 nm for standard builds. Confirm the limit for the selected fiber and connector.
Custom CW power handlingUp to 5 W CW where available. Requires confirmation for the requested configuration.
Operating temperature−20 to +55 °C
Storage temperature−10 to +60 °C

Construction details

  • Faraday element: The in-line assembly uses short-wavelength Faraday material to pass forward light and suppress reflections travelling back toward the source.
  • Monitoring tap: The optional integrated tap splits off part of the output for power monitoring.
OIUW datasheet (PDF)

Downloads

Datasheets & documents

System integration

Integration and compatibility

  • Optical interface and fiber: Fiber type: SM400, SM450, SM600, Hi780, PM405, PM460, PM630, PM780, MM50/125 · Fiber cover: 0.9 mm buffer tube, Bare fiber
  • Wavelength and loss budget: Center wavelength: 400 nm, 450 nm, 460 nm, 500 nm, 550 nm, 600 nm, 633 nm, 650 nm, 700 nm, 750 nm, 780 nm, 800 nm · Isolation stage: Single-stage, Dual-stage

Technical FAQ

Integration questions for Fiber Optical Isolator 400–780 nm (OIUW)

Which fiber and connector does the Fiber Optical Isolator 400–780 nm (OIUW) use?
  • Fiber type: SM400, SM450, SM600, Hi780, PM405, PM460, PM630, PM780, MM50/125 · Fiber cover: 0.9 mm buffer tube, Bare fiber. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Fiber Optical Isolator 400–780 nm (OIUW) be included in an optical power budget?
  • Center wavelength: 400 nm, 450 nm, 460 nm, 500 nm, 550 nm, 600 nm, 633 nm, 650 nm, 700 nm, 750 nm, 780 nm, 800 nm · Isolation stage: Single-stage, Dual-stage. Check the Isolators & Circulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.

Need this configured?

Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.

Model selection

Nearby series comparison

Compare Fiber Optical Isolator 400–780 nm (OIUW) with the closest available models in the Isolators & Circulators family.

Selection parameterFiber Optical Isolator 400–780 nm (OIUW) (current)Fiber Optical Isolator 800-1060nm High Power 20W
Wavelength range400 nm, 450 nm, 460 nm, 500 nm, 550 nm, 600 nm, 633 nm, 650 nm, 700 nm, 750 nm, 780 nm, 800 nm1060, 850, 980
Optical performance1 dB typical, 3.5 dB maximum. Excludes connectors and depends on fiber core size.—
Fiber typeSM400, SM450, SM600, Hi780, PM405, PM460, PM630, PM780, MM50/125HI1060, HI780, HI980, PM780, PM850, PM980
Connector / controlNone, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, LC/APC, LC/UPC, SpecialNone, FC/APC, Special