Zolix · Motorized Stages
TBZF10-120 Motorized Vertical Stage
Motorized vertical stage with 10 mm travel and a 120×120 mm table. Transmission: grinding screws φ8×1; guide: linear-slider guides. Repositioning accuracy ≤±2.5 µm; max speed 3.64 mm/s. Horizontal load capacity 10 kg; weight 2.5 kg.
- Travel range
- 10 mm
- Repositioning accuracy
- ≤±2.5 µm
- Horizontal load capacity
- 10 kg
- Table size
- 120×120 mm
Specifications
Mechanical
| Travel range (mm) | 10 |
|---|---|
| Table size (mm) | 120×120 |
| Transmission mechanism | Grinding screws φ8×1 |
| Guide mechanism | Linear-slider guides |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 2.5 |
Accuracy
| Resolution, full/half step (µm) | 1.82/0.91 |
|---|---|
| Resolution, 20× microstep (µm) | 0.091 |
| Max speed (mm/s) | 3.64 |
| Repositioning accuracy (µm) | ≤±2.5 |
| Backlash (µm) | ≤5 |
| Static parallelism (mm) | ≤0.1 |
Motor & electrical
| Motor and step angle (°) | Two-phase 42 stepping motor, 1.8 |
|---|---|
| Motor model | Shinano, SST43D2126-10 |
| Motor current (A) | 1.7 |
| Motor holding torque (N·m) | 0.456 |
| Stepper driver (optional) | Moons, SR2 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Limit sensors (built-in) | 2×GP1S09xHCPI (SHARP, Japan) |
| Origin sensor (built-in) | 1×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | NPN open-collector output DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Horizontal load capacity (kg) | 10 |
|---|
Compatible controllers
For the two-phase 42 stepping motor this stage uses.