Zolix · Motorized Stages
SIN12-60 Motorized Rotation Stage
Motorized rotation stage with ±6° rotation, a φ60 mm table and a φ12 H7 centre bore. Transmission: ball screws φ6×1. Repositioning accuracy ≤±0.005°; max speed 22°/s. Horizontal load capacity 6 kg; weight 0.5 kg.
- Minimum incremental motion
- ≤0.011°
- Horizontal load capacity
- 6 kg
- Angle range
- ±6°
- Table diameter
- φ60 mm
Specifications
Mechanical
| Angle range (°) | ±6 |
|---|---|
| Table diameter (mm) | φ60 |
| Centre bore (mm) | φ12 H7 |
| Table thickness (mm) | 35±0.1 |
| Transmission mechanism | Ball screws φ6×1 |
| Guide mechanism | Translational movement: precise linear-slider guides. Rotary movement: a pair of angular contact ball bearings |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 0.5 |
| Shaft coupling, OD-bore-bore (mm) | 16-3-5 |
Accuracy
| Resolution, full/half step (°) | ≈0.011/0.0055 |
|---|---|
| Resolution, 20× microstep (°) | ≈0.00055 |
| Minimum incremental motion (°) | ≤0.011 |
| Max speed (°/s) | 22 |
| Repositioning accuracy (°) | ≤±0.005 |
| Static clearance (°) | ≤0.01 |
| Backlash (°) | ≤0.08 |
| Axial runout (µm) | ≤5 |
| Radial runout (µm) | ≤10 |
Motor & electrical
| Motor and step angle (°) | Two-phase 28 stepping motor, 1.8 |
|---|---|
| Motor current (A) | 1.3 |
| Motor holding torque (mN·m) | 78.5 |
| Motor model | Shinano, STP-28D1003-08 |
| Stepper driver (optional) | Moons, SR2 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Origin sensor (built-in) | None |
| Limit sensors (built-in) | 2×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | NPN open-collector output DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Horizontal load capacity (kg) | 6 |
|---|
Compatible controllers
For the two-phase 28 stepping motor this stage uses.