Zolix · Motorized Stages
PSAV400-240ZF Motorized Vertical Stage
Motorized vertical stage with 400 mm travel and a 240×240 mm table. Transmission: φ40×5 Ball screws reducer, reduction ratio is 4:1; guide: 4×linear-bearing guides. Max speed 12.5 mm/s. Horizontal load capacity 100 kg; weight 28 kg.
- Travel range
- 400 mm
- Horizontal load capacity
- 100 kg
- Table size
- 240×240 mm
- Transmission mechanism
- φ40×5 Ball screws reducer, reduction ratio is 4:1
Specifications
Mechanical
| Travel range (mm) | 400 |
|---|---|
| Table size (mm) | 240×240 |
| Transmission mechanism | φ40×5 Ball screws reducer, reduction ratio is 4:1 |
| Guide mechanism | 4×linear-bearing guides |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 28 |
Accuracy
| Resolution, full/half step (µm) | 6.25/3.125 |
|---|---|
| Resolution, 8× microstep (µm) | 0.781 |
| Max speed (mm/s) | 12.5 |
Motor & electrical
| Motor and step angle (°) | Two-phase 57 stepping motor, 1.8 |
|---|---|
| Motor model | MS-57BYG250CSC |
| Motor current (A) | 2.4 |
| Motor holding torque (mN·m) | 1900 |
| Stepper driver (optional) | Moons, SR4 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Limit sensors (built-in) | 2×KX-SS-5GL2 |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | Dry contact point output |
| Sensor output logic | Output ON when sensor is triggered |
Load capacity
| Horizontal load capacity (kg) | 100 |
|---|
Compatible controllers
For the two-phase 57 stepping motor this stage uses.