Back to Home
DPbS Series

Spectroscopy Detectors · Mid-infrared single-point detectors

DPbS Series

DPbS Room-Temperature PbS Detectors

Room-temperature lead-sulfide detector modules for near- and mid-infrared scanning measurements, with integrated gain selection and voltage output.

View quote list

Specifications

ModelsDPbS2900 / DPbS3200
Active area4 × 5 mm / 6 × 6 mm
Spectral range0.8–2.9 µm / 0.8–3.2 µm
Gain selection×1 / ×10 / ×100
Recommended modulation frequency400 Hz
Signal outputVoltage

Volledige bronspecificatie

Vergelijking per model

De volledige vergelijking van de fabrikant staat hieronder, zodat modelverschillen zichtbaar blijven en niet tot één bereik worden teruggebracht.

Two responsivity/detectivity exponents are poorly encoded in the manufacturer HTML and are therefore marked for confirmation rather than silently corrected.

ParameterDPbS2900DPbS3200
Effective area4 × 5 mm6 × 6 mm
Spectral range0.8–2.9 µm0.8–3.2 µm
Peak wavelength≈ 2.2 µm≈ 2.1 µm
Voltage responsivity Su≈ 3 × 10⁴ V/W≈ 300 V/W
Resistance Rd0.2–2 MΩ0.1–0.3 MΩ
D*Confirm source exponentConfirm source exponent
Time constant≤ 200 µs≤ 400 µs
Gain×1 / ×10 / ×100×1 / ×10 / ×100
Input offset voltage< ±1 µV< ±1 µV
Preamplifier input drift±1 µV±1 µV
Frequency response100–1000 Hz (400 Hz recommended)100–1000 Hz (400 Hz recommended)
Signal outputVoltageVoltage
Output polarityPP

Ontwerp- en integratiedetails

  • Room-temperature photoconductive PbS detectors with an integrated preamplifier.
  • Voltage output and selectable ×1, ×10 and ×100 gain.
  • Intended for lock-in detection over the 0.8–3.2 µm region.

Toepassings- en aansluitnotities

  • Use a lock-in amplifier; select voltage-input mode when pairing with DCS103 or DCS300PA.
  • The source recommends 400 Hz modulation within the 100–1000 Hz response range.

Waarden zijn overgenomen uit de gearchiveerde producttabel en tekeningen. Bevestig de uiteindelijke detector, elektronica en spectrograafaansluiting voor uw configuratie.

Gearchiveerde productpagina van de fabrikant