Opto-Mechanics · Cryogenic Piezo Stages - Toolkits
PM.LT.ToolBox.Basic
Basic cryogenic installation toolbox; one set with BeCu M1.6/M2 screws, PA-standard 2/3/4-pin connectors, Peek UHV 4-pin connector parts, screwdriver, tweezers, USB driver, software, and manual.
Datasheet (PDF) ↗Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Toepassingen
Cryo-compatibele assemblage
BeCu-schroeven en PEEK-connectoren geschikt voor millikelvin- en hoogveldgebruik.
Vermijden van magnetische verontreiniging
Houdt ferromagnetische bevestigers uit een systeem waar één stalen schroef het veld vervormt.
Onderhoud en herbouw
Eén kit dekt de bevestigers, connectoren en gereedschappen die een stapel nodig heeft bij het openen van een cryostaat.
Specifying this part
What this model has to survive, and what it needs around it
Hardware rated for the environment
BeCu screws in M1.6 and M2 rated to 30 mK and 35 T, PA connectors in 2, 3 and 4-pin, a Peek UHV connector set, plus driver and manual. Specified as a set because substituting standard workshop hardware is the usual way a non-magnetic assembly stops being non-magnetic.
Heat load at the cold plate
Stick-slip inertial drives dissipate energy per step and draw no holding current once stopped, so the steady-state load on the mixing chamber is the wiring loom rather than the motor. Anchor the loom at each temperature stage and thermalise the moving body with an FTC copper braid.
Non-magnetic construction
Titanium bodies and BeCu fasteners throughout, rated for operation to 35 T and down to 30 mK with the .ULT option, at 2 × 10⁻¹¹ mbar with .UHV. A single steel screw substituted at installation is enough to compromise a high-field assembly.
Full series comparison, controller pairing and mounting hardware on the cryogenic piezo stages overview, or work through the selection with the configurator.
