Opto-Mechanics · Cryogenic Piezo Stages - Adapter plates - vertical orientation
AP.LT.R25.Optic-v
Pure titanium vertical-orientation adapter plate for tilting Rotator25-Optic by 90 deg in MultiFields LT cryogenic stacks; non-magnetic screws included.
Datasheet (PDF) ↗Cataloguscontext
De plaats van AP.LT.R25.Optic-v in het assortiment
AP.LT.R25.Optic-v staat vermeld binnen de familie Cryogenic Piezo Stages - Adapter plates - vertical orientation. Gebruik de productfamiliepagina en eventuele modelspecifieke downloads op deze pagina om de vereiste configuratie te bevestigen.
Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Toepassingen
XY-stapels omzetten naar XZ
Zet een horizontale samenstelling op zijn kant zonder het montageschema te herontwerpen.
Zijmontage aan een koude vinger
Bevestig positioneerders aan het verticale vlak van een cryostaat-koudevinger of monsterstaaf.
Bereiken van lastige optische toegang
Heroriënteer een tafel zodat de slag uitlijnt met een venster of poort die door het cryostaatontwerp vastligt.
Specifying this part
What this model has to survive, and what it needs around it
Heat load at the cold plate
Stick-slip inertial drives dissipate energy per step and draw no holding current once stopped, so the steady-state load on the mixing chamber is the wiring loom rather than the motor. Anchor the loom at each temperature stage and thermalise the moving body with an FTC copper braid.
Non-magnetic construction
Titanium bodies (BeCu on the .ULT variants) and BeCu fasteners throughout, rated for operation to 35 T and down to 30 mK with the .ULT option, at 2 × 10⁻¹¹ mbar with .UHV. A single steel screw substituted at installation is enough to compromise a high-field assembly.
Full series comparison, controller pairing and mounting hardware on the cryogenic piezo stages overview, or work through the selection with the configurator.
Related products
AP.LT.L16z-v
Pure titanium vertical-orientation adapter plate for tilting Linear16-z by 90 deg in MultiFields LT cryogenic stacks; non-magnetic screws included.
AP.LT.L16x-v
Pure titanium vertical-orientation adapter plate for tilting Linear16-x by 90 deg in MultiFields LT cryogenic stacks; non-magnetic screws included.
AP.LT.R16-v
Pure titanium vertical-orientation adapter plate for tilting Rotator16 by 90 deg in MultiFields LT cryogenic stacks; non-magnetic screws included.
AP.LT.L25-v
Pure titanium vertical-orientation adapter plate for tilting Linear25 by 90 deg in MultiFields LT cryogenic stacks; non-magnetic screws included.
