Back to Home
AutoScrew.LR.Set.02

Opto-Mechanics · Ambient Piezo Stages - AutoScrew actuators

AutoScrew.LR.Set.02

Long-range AutoScrew actuator set for 2 inch optic mounts; 10 mm linear screw travel; +/-3 deg tilt range; piezo motor drive for remote mirror mount adjustment.

View quote list
Datasheet (PDF) ↗

Specifications

Cable & ConnectorStandard, shield cable and SMB plug
Travel range10 mm
Max. Velocity2 mm/min
Minimum Incremental Motion20 nm (typical), up to 50 nm
Driving Frequency2 kHz
Max. Output Force20 N (up to 50N)
Holding Force100 N
Lateral Force1 N
Max Driving Voltage100 V
ControllerMC - Newton E4

Toepassingen

Motoriseren van bestaande houders

Vervang een handmatige steller op een houder die u al heeft, zonder de samenstelling te herontwerpen.

Uitlijnen op afstand

Stel optiek af in een behuizing, vacuümkamer of gevaarlijke zone zonder die te betreden.

Geautomatiseerde uitlijnroutines

Laat software een spiegel of lens naar piek­signaal lopen in plaats van een operator aan een knop.

Specifying this part

What this model has to survive, and what it needs around it

Retrofitting motion to an existing mount

Piezo actuators that replace the manual adjusters on a kinematic mount, adding remote or automated alignment without rebuilding the optical assembly around a motorised stage.

Vacuum and non-magnetic versions

Most of the range is orderable as .HV (high vacuum), .UHV (ultra-high vacuum) or .NM (non-magnetic). The suffix changes materials, cabling and bake compatibility rather than the mechanics, so specify it against the chamber the stage will live in.

Full series comparison, controller pairing and mounting hardware on the ambient piezo stages overview, or work through the selection with the configurator.