Mightex · Manual and analog LED drivers
Single-channel drivers for Mightex Type-H super high-power LEDs: BLS-13000-1E up to 13 A, BLS-18000-1N up to 18 A and BLS-27000-1 up to 27 A, with manual or 0–5 V analog control and up to 3 kHz modulation.
Manufactured by Mightex. Precisometer is a Mightex distribution partner: we quote, integrate and support Mightex products, with in-person support in the Netherlands and Belgium.
Based on: Mightex BLS high-current driver page.
From Mightex
High Current, manual and analog-voltage controlled LED drivers for Mightex Type-H Super High Power LEDs:
Mightex BLS-13000-1E, BLS-18000-1 and BLS-27000-1 LED controllers are designed for driving Mightex Type-H Super High Power LED Sources. The controllers have two operation modes:
Manual Mode: the output current can be controlled by manually turning the knobs; or Trigger Mode: the output current can be controlled via an external analog input signal between 0-5V.
The control mode is selected with a slide switch on the front panel, and the factory default is “Manual” mode. BLS-13000-1E, BLS-18000-1 and BLS-27000-1 have a maximum current setting of 13,000mA, 18,000mA, and 27,000mA respectively.
When the controller is set to “Trigger” mode, the output current is fully controlled by the input analog signal (0-5V).
Configurations
| Part number | Mightex description | Add to enquiry |
|---|---|---|
| BLS-18000-1N | BLS-Series LED Drivers: Manual/Analog Voltage-controlled, single channel, max current 18000mA and up to 3kHz modulation frequency. | |
| BLS-13000-1E | BLS-Series LED Drivers: Manual/Analog Voltage-controlled, single channel, max current 13,000mA and up to 3kHz modulation frequency. 12VDC input. | |
| BLS-27000-1 | BLS-Series LED Drivers: Manual/Analog Voltage-controlled, single channel, max current 27,000mA and up to 3kHz modulation frequency. 12VDC input. |
Specifications
| Parameters | Model Number | Unit | ||||
|---|---|---|---|---|---|---|
| BLS-13000-1* | BLS-13000-1E/1N | BLS-18000-1* | BLS-18000-1N | BLS-27000-1 | ||
| Power Supply Input Voltage (DC), Vdc | 48 | 12 | 12 | 12 | 12 | V |
| Power Supply Input Current (DC) | > 2.5A | > 13.75A | ||||
| Maximum Driving Voltage (Vmax) | 5.5 | 7.5 | V | |||
| Current Accuracy | ±3% | |||||
| Maximum Driving Current (Imax) | 13 | 13 | 18 | 18 | 27 | A |
| Channel Output Power Limit (Pmax) | < 72 | < 95 | < 135 | < 135 | < 135 | W |
| Channel Frequency Response | < 3 | KHz | ||||
| External Analog Input | 0 ~ 5 | V | ||||
Reproduced from Mightex (official page), retrieved 2026-10-15.
Downloads
Build your experiment
Conceptual workflowFollows the four steps on Mightex’s microscope LED page: wavelength, LED configuration, LED controller, microscope coupling. It is not a verified configuration: we check how the parts fit your equipment before quoting.
Single wavelength, several combined, or switchable.
A constant-current driver: manual/analog, software/TTL, or high-current for Type-H.
View details
View details
This pageAdapter for your microscope, or a tube into the infinity path.
Synchronise the LED with cameras and other equipment.
Manual and analog LED drivers
Product familyManual and analog LED drivers
Two-channel manual and analog-input drivers for Mightex LEDs: BLS-1000-2 with 500/750/1,000 mA limit settings and up to 100 kHz modulation, BLS-3000-2 with 1,000/2,000/3,000 mA and up to 50 kHz.
Product familyManual and analog LED drivers
Mightex’s SLA-series two-channel universal LED drivers with two control modes: Manual Knob Control Mode: the current output of each channel can be adjusted manually Analog Input Control Mode: the current output of each channel can be controlled via 0~5V analog input.
Product familyManual and analog LED drivers
Mightex’s SLB-1200-1 universal LED driver is designed for driving a broad range of LED light sources with two control modes: Manual Knob Control Mode: the output current can be adjusted manually; and
All led controllers, triggering & software |Find my solution
