Pulse energy, repetition rate, pulse width
PS-FG-515A515 nm green high-power pulsed laser
515 nmPS-FG-515A is a 515 nm Pulsed laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. Picosecond Pulsed Green Laser. Key specifications: operating mode Pulsed, output / average power 1-20 W, single pulse energy (uj) 1-40. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PS-FG-515A
21 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 1-20 W |
| Beam / notes | Picosecond Pulsed Green Laser |
| Single pulse energy (uJ) | 1-40 |
| Rep. rate (kHz) | 500-1000 |
| Pulse duration (ps) | 10±1 |
| Ave power stability (rms, 4 hours±3℃) | <5%, <3% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| M2 | <1.3 |
| Polarization ratio | >100:1 Horizontal |
| Cooled method | Water cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 515±1 |
| Average power (W) | 1-20 |
| Beam diameter at the aperture (1/e2,mm) | <3 |
| M² | <1.3 |
| Beam height from base plate (mm) | 122 |
Applications
Uses named on this model’s datasheet.
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Film scribing
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the PS-FG-515A with nearby pulsed lasers across the wavelength range.
